WELLER SOLDERING irons, solder iron holders, solder iron stands, smoke absorbers, fume extractors, battery solder irons, wood burning irons, butane soldering irons, solder iron tip cleaners

Online PDF Catalogs

How To Solder Instruction- Or tips on how to solder Better!

 Weller WSA.350 Bench-Top Smoke Absorber/Fume Extraction

Small, affordable and efficient smoke absorbing unit for the bench.
Only about 6.5 inches across.
Removes flux fumes from soldering workbench and is great for workspaces using more active fluxes used with lead-free solder. Fumes are absorbed by the replaceable carbon-activated filter. Stand allows the smoke absorber to be adjusted to varying angles. Fan is quiet and will not add significant noise to the workspace.
Includes two replacement filters and is ESD safe.
Length (Inches) 10  Width (Inches) 6.5  Height (Inches) 11

WSA.350 Smoke Absorber  WSA.350F Filters (3 Pack)  [GO TO ORDER PAGE]

WFE2P Bench-Top Fume Extractor

2 Operator Fume Extractor, Self-contained, 120V
WFE2P # 0053623299

Number of Operators 2 - Condensation Filter Type - 50 Watts - Pump Type- Rotary Vane - Packaging Industrial Box/Carton

Product Features:
Self-contained bench-top fume extraction unit
No external air source required
Capacity for up to two Weller fume extraction irons / stations
Reduces harmful soldering emissions from the source
Extracts 99.99% of fumes before they can be released into environment
Efficient four-stage replaceable filter system
Silent running, maintenance-free pump for extended continuous service
Compact size uses minimal bench space and allows portability
For use with Weller FE series fume extraction soldering irons
UL and cUL listed, OSHA compliant
  PDF Details  -  [PDF Help]   WFE.2P   [GO TO ORDER PAGE]

0053635299 Locking Clip For Fume Extraction Pencil Hose
0053641099 Replacement Filter Cartridge for WFE.2P
0053642199 Replacement Condensation Prefilter for WFE.2P (3pk)
0058735230 Replacement Motor, 120V for WFE.2P
0058735237 Replacement Capacitor, 8UF/400V for WFE.2P
0058735739 Replacement Pump, Including Clutch, for WFE.2P
0058735742 Replacement Exhaust Silencer for WFE.2P
0058735761 Spacer and Rubber Mounts for WFE.2P
0058735814 Replacement Motor Cap for WFE.2P

WTA Series
Thermal Tweezers Tips for WTA50

Don't Get Stuck With ANTI-SEIZE LUBE!

Don't Get Stuck ! Stop your tips from seizing in the iron.
Just apply to tip and insert into iron.

Weller Tip Tinner and Activator, 1.5 Oz.

For regeneration of oxidized tips.
Works fast and easily with low temperature. Environmentally safe, no halides, lead, rosin, or residue. Regular use will prolong life time of the tip!

Polishing Bar for your tips

Polishing bar cleans and renews soldering tips. Tip Tinner, Tip Tinning  preparation.
Removes plastic resins, oxidation, silicone grease from tip
Re-tin tip after use to prevent oxidation

Soldering Iron Temperature Controller WPC300
WPC300    [No Longer Available]

However, the below variac works exactly the same

Battery Operated Soldering Iron BP860MP
Heats up to working temperature in under 15 seconds
White LED light illuminates working surface
Dual power (hi/lo) indicated by red and green LEDs
Co-molded grip for a comfortable feel
Protective safety cap turns off power when placed on tool
Over 150 intermittent solder joints with fresh batteries
Perfect for field service repair on small parts and
components
Includes iron, tip, 4 AA batteries, lead free solder,
and tip wrench/stand
PDF  [PDF Help]

BP10 037103221544 Tip, Conical, 0.03125", for BP860MP $7.95

BP11 037103221568 Tip, Chisel, 0.125", for BP860MP  $7.95

Battery Operated Soldering Iron BP645MP
Heats up to working temperature in under 15 seconds
Red LED indicates when power is on
Protective safety cap turns off power when placed on tool
Over 120 intermittent solder joints with fresh batteries
Perfect for field service repair on small parts and components
Includes iron, tip, 3 AA batteries, lead free solder, and tip wrench
BP1 repl tip 06/06

Battery Operated Soldering Iron Kit BP645CMP
Heats up to working temperature in under 15 seconds
Red LED indicates when power is on
Protective safety cap turns off power when placed on tool
Over 120 intermittent solder joints with fresh batteries
Perfect for field service repair on small parts and components
Includes iron, tip, 3 AA batteries, lead free solder, and tip wrench
BP1 repl tip 06/06

 Wood Burning Iron Kit
Featherweight iron with pencil handle
Ideal for wood burning, hobbies and crafts
Also ideal for jewelry, model railroads, and micro electronics
Develops 900F/480C temperature
Stainless steel barrel, heat and impact resistant handle
Kit contains 9 woodburning tips, embossing tip, hot knife, and stand
Includes complete project booklet
UL and cUL listed

Therma-Boost Rope Cutter Iron
Therma-Boost Foam Cutter Iron
Therma-Boost Scoring and Smoothing Iron
DUAL 30/130 WATT HEAT - 850-950˚

For a wide variety of jobs including soldering, cutting, and shaping
Therma-Boost trigger gives you added bursts of power when you need it
2 lights on the back of tool indicate standard or Therma-Boost modes
Heats up to working temperature in just 45 seconds
For continuous use. Therma-Boost mode can be used intermittently
Ultra-lightweight - weighs just 3 oz.
Kit includes heat tool, stand, 6 multi-use tips, and instructions
Tips are for soldering, rope and foam cutting, smoothing, and scoring
Tip changes are fast and easy
UL and cUL listed

The W60P3, 60 Watt Iron packs a lot of power
Temperature Controlled by tip allows for 700˚ or 800˚ soldering temperatures. 60 Watts of power helps keep the tip from cooling down even when soldering larger wires or joints. Great for when a station is just too bulky to utilize.

 
Temperature Tip Controlled - Wattage 60 W - Temperature Range 700 F - 800 F
Cord Length 6 ft. with either 2 or 3-wire AC plug - Supplied With CT5A7 Tip

 [Get A Stand #PH60]

View Catalog Page & Parts List  
[CT5 Series Tips for W60 Irons-Click Here]

W100P3, 100 Watt Iron

Uses Weller "closed loop" method of controlling maximum tip temperature
Portable line voltage iron - no base station required
Stainless steel modular plug-in heater, greater efficiency & versatility
Temperature is controlled by tip-600F, 700F, and 800F tips available
Nominal heat-up time with 700F tip is 110 seconds
Three-wire grounded cord set
Uses CT series tips
Heating element type: Nichrome wound, plug in
UL and cUL listed
Supplied With CT6F7 Tip   [Get A Stand #PH100]

The WP SERIES of Irons are perfect for general purpose work.
Basically, Lower wattage for small to medium jobs, higher wattage for medium to larger jobs. Good for PCB use and wire joints.


Soldering Irons for general purpose use.
Basically, higher the wattage for bigger soldering jobs.
25-35 watt are good for PCB work, wires and other general purpose soldering applications.

ST Series Tips (WP25,30,35) Available-CLICK HERE

Low Cost Iron and stand for general purpose Work. Kit available-see SP23LK above .
How To Solder Instruction- Or how to solder Better!

Fine quality consumer mini iron - Lightweight and pencil thin (7"/178mm long)
Ideal for fine soldering and hobby work Such as electronic kits, model railways and jewelry making
Replaceable nickel-plated copper tip - Stainless steel barrel, heat and impact resistant handle
IMPORTANT: Use only Weller tips

Great for really small work!
Lightweight, pencil thin soldering iron with stay-cool handle, designed for soldering miniature components
Develops tip temperature of 800F with 3-wire grounded plug
Uses Weller MP series auto slide-in tips - [Additional Tips-WM120] comes with MP131 Tip

SL-Series Solder Iron Combo's will give you the flexibility you need if your solder jobs vary from small to large.
Get one handle and you can easily swap out higher or lower wattage heaters, each with an assortment of tips. Formerly Ungar.
Get a combo below or Build You Own

Build You Own Mix-N-Match Separate Heater/Handle/Tip
 

Combo Includes:7400 handle, 537S (25Watt) heater, PL111 tip
Modular soldering irons utilize interchangeable handles, heaters & tips
Additional: Tips - Heating Elements - Handles
Consists of 7400 handle, 537S heater, PL111 tip -3-wire grounded UL and cUL listed - Uses 9800 or 8800 iron holder

Combo Includes:7400 handle, 1237S (33Watt) heater, PL113 tip
Modular soldering irons utilize interchangeable handles, heaters & tips
Additional: Tips - Heating Elements - Handles - 3-wire grounded UL and cUL listed - Uses 9800 or 8800 iron holder

Combo Includes:7400 handle, 4037S (45Watt) heater, PL133 tip
Modular soldering irons utilize interchangeable handles, heaters & tips
Additional: Tips - Heating Elements - Handles - 3-wire grounded UL and cUL listed - Uses 9800 or 8800 iron holder

Ungar Soldering Equipment
Formally Ungar - Assimilated by Weller, resistance was futile

Build your own iron or get replacements parts, tips, heaters or handles.
PL Series Tips, thread in and thread on style tips

UNGAR SOLDERING IRONS - SL325, SL335, SL345 +Solder Iron Combo's

Heating Elements - 535S, 537S, 1235S, 1237S, 37, 33 and others.

Ungar 9000 series Tips - For UTC-Series, 9931AS, 9900AS, 2110AS...

Ungar 4000 series Desolder Tipletts - For UTC-Series, 9931AS, 9900AS, 2110AS...

Ungar PL- series Tips - Thread-In & Thread-On Style Tips...

Ungar UTC-300 Solder Station - [NLA] Discontinued but Tips Available - Click Here
Replaced by the Weller WES51.

• 80 WATTS [Optional Power Controller Available]
• 120vac iron.
• Temperature 950 degrees F (510C)
• Heavy Duty for Large Solder Jobs,
• Stained glass hobby work etc...
• MTG21,22 Sold separate, See Below  
• View Catalog page in PDF

WLC-200 Stained Glass Station has variable temperature suitable for helping you with your creations. A good tool lets you focus on your work.

• On/off switch with “power-on” indictor light
• Variable power control produces 5-80 watts
• Quality lightweight stained glass iron
• Cushioned foam grip with replaceable heating element
• Ideal for the professional or hobbyist
• Includes MTG20 3/8" replaceable tip
GREAT FOR HOBBY AND STAINED GLASS [CLICK HERE FOR ORDER PAGE]