LAN TESTER, LAN DIAGNOSTICS, CAT 5 TESTER, LAN ROVER, LAN SCRAPER, NETWORK CABLING TESTER, NETWORK TESTER

LanRover^TM (TP500)

CAT 5 Tester

The LanRoverTM Tester/Analyzer offers a new price/performance level for verification of wiring faults and configurations on all your data cable. The cable test results are displayed on the main unit and remote in less than 2 seconds. The LanRoverTM includes features such as auto-on/auto-off, simultaneous multi-fault indications, a debug mode with from/to and failures for each pair and a battery low indicator. It tests for shorts, opens, miswires, reversals and split pairs. This unit includes a carrying case and patch cables.

[Click to view PDF instruction manual]

LanRover PRO^TM (TP600)

CAT 5 Tester with LCD Display $159.95

The LanRoverPROTM Tester/Analyzer is the high performance length measurement CAT 5 tester that identifies multiple faults clearly without interpretation, has one-ended testing with pre-test for fast result, clear wiremapping form displayed on 2-line, 16 character LCD display and measures cable length. The LanRoverPROTM has a convenient snap-together case for easy storage and convenient patch cable testing. The LanRoverPROTM includes features such as auto-on/auto-off, a tone generator mode for use with tone tracers and a battery low indicator. It tests for shorts, opens, mis-wires, reversals and split pairs. This unit includes a carrying case and patch cables.

[Click to view PDF instruction manual]

LanScaperTM Network Tester NT700

The new LanScaperTM Network Tester is the first in a new line of Physical Layer Network Management Devices. The LanScaperTM combines the functions of a high-end cable tester and length measurement device with the capability to monitor and correct network problems connected with the physical layer and link conditions of the network.

Identifies port services like Ethernet, ISDN, POTS and Token-Ring while reporting such crucial information as network speed, capability and location of switches and other network devices.
Pinging function verifies connectivity to network devices and queries PC/NIC's.
Detects legacy "Phantom Power", reports current and voltage capability of analog telephone lines, identifies (maps) remotes while cable testing
Conducts link tests to ID speed
Verifies functional speed capability of terminated unconnected cable runs by sampling data packets between two LanScaper units, which exercises the run and reports the result
Automatically accesses DHCP host and obtains network information
Tests cabling configuration and verifies connectivity and length of run while conducting tests for opens, shorts, miswires, split pairs, and reversals
Identifies HUBs, NIC, or auto MDI/MDI-X devices
Blinks HUBs to ascertain connected configuration
Displays advertised network speed/duplex
Measures and reports any voltage on lines
Wiremaps network connections with remote identifiers
Generates multiple tone levels for signal tracing and cable identification

LanRover PRO^TM (TP607)

CAT 5 Tester with 8 remotes

The LanRoverPROTM Tester/Analyzer is the high performance length measurement CAT 5 tester that identifies multiple faults clearly without interpretation, has one-ended testing with pre-test for fast result, clear wiremapping form displayed on 2-line, 16 character LCD display and measures cable length. The LanRoverPROTM has a convenient snap-together case for easy storage and convenient patch cable testing. The LanRoverPROTM includes features such as auto-on/auto-off, a tone generator mode for use with tone tracers and a battery low indicator. It tests for shorts, opens, mis-wires, reversals and split pairs. This unit includes a carrying case and patch cables.

LanScaperPRO

For cable testing, the LanScaperPRO provides full cabling testing, displaying wire map, ID, and any faults...

Identifies and measures power delivered by IEEE 802.3af PoE and legacy Cisco In-Line Power
• Detects and reports speed and capabilities for active Ethernet and other devices up to 1 Gbps
• Simultaneously pings three addresses at once to verify connectivity to network devices
• Blinks a link indicator to identify hub or switch port and links to Cisco bridge or router ports using Cisco Discovery Protocol
• Tests cabling configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
• Displays length measurement for each pair in feet or meters
• Generates selectable tones on selected pins for use with tone tracers
• Back-lit alphanumeric LCD with icon flags

[CLICK TO GO TO ORDER PAGE]

• Network testing for port discovery, ping test, and hub flash
• Test PoE to ensure adequate power for powered devices such as VoIP phones
• Identify speed up to 1 Gbps, duplex mode, wiring mode, and polarity of transmit pair on active Ethernet devices
• Conduct single ended and remote cable tests with display of PASS, wiremap, ID, and faults for network cable
• Measure cable length
• Tone and trace cables
• Wiremap network connections with remote identifiers

The LanScaperPRO™ Cabling and Network Tester combines the functions of a high-end cable tester and length measurement device with the capability to identify, monitor, and correct LAN issues associated with physical layer and link conditions in the network. In network mode testing, the easy-to-use LanScaperPRO enables quick identification at unknown RJ45 jacks for active Ethernet, POTS, token ring, or other devices as well as for presence of devices using power over Ethernet (PoE) at the other end of the jack or cable being tested. LanScaperPRO pings network devices to verify connections and IP addresses, automatically accessing DHCP hosts to obtain network information and can quickly identify hubs, NICs, or auto MDI/MDI-X devices. It also conducts link tests to identify speed and capabilities of network drops. For cable testing, the LanScaperPRO provides full cabling testing, displaying wire map, ID, and any faults, including shorts, opens, miswires, split pairs, and reverses. The full-featured LanScaperPROmeasures cable length and generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin.