 |
|
|
 OVERVIEW |
|
|
|
| |
EeRom-8U ROM Emulator is aimed
at developers who focus on making ROM based programs and data including
embedded systems, BIOS, video games, robotics, printer drivers, graphic
controller, postscript interpreters, character font libraries, and other
ROM based application. In general, the emulator is used during program
and data developing period to eliminate the frustration of repeated
EPROM burn-erase cycles. EeRom-8U ROM Emulator easily plugs in place of
the ROM through the emulator¡?s target adapter.
Other ROM Emulators can emulate only
EPROM. But EeRom-8U ROM Emulator can emulate many types of memories
(EPROM, Flash-ROM, EEPROM, NVRAM) currently used. So EeRom-8U ROM
Emulator can be called a ¡°memory emulator¡±. Also EeRom-8U can properly
operate with user¡?s board using 8bit/16bit/32bit data bus. EeRom-8U ROM
Emulator adopts USB interface. This helps the user to have faster
communication speed than the parallel port. From this, the user can
enormously reduce the developing time and adopt high speed SRAM(12ns)
for matching well with high speed RISC and CISC CPU. Therefore both
professional and novice program developers will find that EeRom-8U ROM
Emulator can be an exceptional valuable tool. |
|
|
|
|
|
|
The
Characteristics of EeRom-8U |
|
|
|
| |
High speed USB interface (Supports
Plug & Play)
1M Byte (8M bit) / sec download speed
Supports 8bit data bus by itself
Uses 1MB high speed memory for proper
emulation : 12ns high speed SRAM
Supports EeRom-8U without outside
electric power supply
Convenient software environment:
supports Windows/98/ME/2000/XP
Supports hex (Intel/Motorola type),
binary file format
Safety circuit against inverse
insertion
|
|
|
|
|
|
|
SYSTEM
REQUIREMENT |
|
|
|
| |
TYPE : IBM PC or compatible,
Pentium / 100 MHz or better
A hard disk drive : 5MB.
PC RAM size : 5 MB
OS : Windows 98/ME/2000/XP
Floppy drive for installation |
|
|
|
|
|
|
TARGET
SYSTEMS |
|
|
|
| |
Your target board requires the
following memory type for proper emulation with EeRom-8U. The basic
EeRom-8U unit supports 8Mbits with 45NS memory.
| |
EeRom-8U
For supporting EEU100s needed |
Software Setting
for Target Memory
( Memory Type ) |
|
EPROM
DATA : 8BIT |
27C64 |
EPROM (2764) |
8K |
| 27C128 |
EPROM (27128) |
16K |
| 27C256 |
EPROM (27256) |
32K |
| 27C512 |
EPROM (27512) |
64K |
| 27C010 |
EPROM (27010) |
128K |
| 27C020 |
EPROM (27020) |
256K |
| 27C040 |
EPROM (27040) |
512K |
| 27C080 |
EPROM (27080) |
1M |
EEPROM
DATA : 8BIT |
2864 |
EEPROM (2864) |
8K |
| 28512 |
EEPROM (28256) |
32K |
FLASH ROM
DATA : 8BIT |
29512 |
FLASH (29512) |
64K |
| 29010 |
FLASH (29010) |
128K |
| 29020 |
FLASH (29020) |
256K |
| 29040 |
FLASH (29040) |
512K |
Supported
PLCC Socket |
PLCC 32 Pin;
ADP28:32PLCC-TO-28DIP, ADP32:32PLCC-TO-32DIP) |
Memory Type
|
Size(Bytes) |
Supported Memory
|
| 2764 |
8K |
2764/A, 27C64, 27HC64 |
| 27128 |
16K |
27128/A/B/D/DI, 27C128 |
| 27256 |
32K |
27256, 27C256, 27H256, 27BV256,
27LV256 |
| 27512 |
64K |
27512/AS, 27C512, 27LV512 |
| 27010 |
128K |
27C010, 27H010, 27HB010,
27LV010/A/L |
| 27020 |
256K |
27C020, 27BV020, 27LV020,
27LC020, 27SF020, 27E020 |
| 27040 |
512K |
27040, 27C040/Q, 27BV040,
27LV040 |
| 27080 |
1M |
27C080, 27LV080 |
| 2864 |
8K |
2864A/AE/B/BE, 28C64/A/AX,
28HC64/B, 28PC64/E, 28BV64, 28LV64/B |
| 28256 |
32K |
28C256, 28HC256 |
| 29512 |
64K |
29C512, 29EE512/A, 29SF512 |
| 29010 |
128K |
29010/L/V, 29C010A, 29F010/A/B,
29EE010/A,29SF010 |
| 29020 |
256K |
29C020, 29EE020/A |
| 29040 |
512K |
29040/A/L/AL/V, 29F040/B |
| 29080 |
1M |
Special port is required. |
|
|
|
|
|
|
|
EeROM-8U
package contains |
|
|
|
| |
|
|
|
|
$295.00
