TEST LEADS, CLIP LEADS, METER LEADS, TEST PRODS, TEST LEAD KITS, TEST PROBES, TEMPERATURE PROBES, BANANA JACK ADAPTERS. INSULATION PIERCING LEADS.

  5674C  DMM Test Lead Kit Deluxe

Test leads with a right angle banana plug are ideal for use with hand held digital multimeter.
Flexible test leads feature high strand count silicone wire for extreme flexibility and high temperature resistance.
Banana plugs are molded directly to the wire for superior pull strength.
Insulated extended fine point adapter allows easy access of hard to reach test points.
Probe body, alligator, and test clip lead attaches directly to test leads for testing versatility
Test accessories conveniently store in the four-fold nylon pouch.
Compatible with most multimeters that accepts safety style sheath banana plugs.
CE Compliant; complies with IEC 1010-2-031 standard for hand held accessories. Replaces the 5674B
PDF  [PDF Help]

  5677B  Deluxe Multi-use Maxi Kit

PDF  [PDF Help]

  5898   DMM test lead set with SS tip for most meters

Designed for Fluke, Amprobe, H-P, Tektronix and Wavetek DMM’s with a safety style of sheathed banana
plug.
· Probe body incorporates a two step mold process. First step is Polypropylene for probe rigidity. Second step is
Santoprene® rubber for handling comfort, added insulation protection and wire strain relief.
· Probe test leads are designed with over-voltage spike protection of up to 6kV.
· Probe body and banana plug are molded directly to the wire for robust pull strength.
· Wire is a high strand count silicone wire for extreme flexibility and high temperature resistance.
· Stainless Steel tip features high conductivity for precision measurements.
· Banana plug spring is nickel-plated beryllium copper for long insertion life.
MATERIALS:
Probe Body: Outer Insulation - Santoprene® Rubber, Color: Gray
Inner Insulation – Polypropylene, Fire Retardant, Color: One Black, One Red
Tip: Stainless Steel
Wire: 18 AWG, 65 x 36 Tinned Copper Strand, Silicone Insulation, Length: 48” (122cm), O.D. .144” (3,66mm)
Banana Plug: Body – Brass, Nickel Plated
Spring – Beryllium Copper, Nickel Plated
Insulation – Polypropylene UL94 V-2, Color: One Black, One Red
RATINGS:
IEC 1010-2-031, Category III, P2 Compliant
Operating Voltage: 1000V
PDF  [PDF Help]

  5899  Multi-use Dmm Test Lead Kit

Test leads with a right angle banana plug are ideal for use with hand held digital multimeter.
Flexible test leads feature high strand count silicone wire for extreme flexibility and high temperature resistance. Banana plugs are molded directly to the wire for superior pull strength. Probe body, medium alligator or Maxigrabber Clip® attaches directly to the flexible test leads for test versatility.
Tri-fold pouch of durable nylon conveniently stores the test accessories.
Compatible with most multimeters that accepts safety style sheath banana plugs.
CE Compliant; complies with IEC 1010-2-031 standard for hand held accessories.
PDF  [PDF Help]

  5904  Deluxe Electric Kit

Test leads with a right angle banana plug are ideal for use with hand held digital multimeter.
Flexible test leads feature high strand count silicone wire for extreme flexibility and high temperature resistance.
Banana plugs are molded directly to the wire for superior pull strength.
A modular probe design allows probes, alligators and grabbers to fit directly onto the test leads for
testing versatility.
Test accessories conveniently store in the four-fold nylon pouch.
Compatible with most multimeters that accepts safety style sheath banana plugs.
CE Compliant; complies with IEC 1010-2-031 standard for hand held accessories.
PDF  [PDF Help]

  5953A  Retractable Tip Probe

Slim retractable probe is fully insulated to within 1/8” of tip.
· Needle point tip adjusts to desired length from 0 to 3” (0 to 76mm)
· Stainless steel needle sharp point easily pierces varnish and thin insulation.
· Tip can be re-pointed if necessary.
· Shrouded banana plug is designed to fit most popular digital multimeter jacks.
· Banana plug molded directly to the wire for robust pull strength.
· Banana plug spring is nickel plated Beryllium Copper for long insertion life.
· 4-foot test lead wire is silicone insulated for high temperature resistance. Also remains flexible at
low temperature
MATERIALS:
Probe: Polypropylene and PVC, black and red
Tip: Stainless steel
Wire: 20 AWG, Silicone insulation
RATINGS:
UL-3111, EN61010-2-031, IEC 1010-2-031, Cat II 600V
Operating Voltage: 600 Max
Current: 3 Amperes
ORDERING INFORMATION: Model 5953A
Includes a set of one black and one red test lead
PDF  [PDF Help]

  Pomona 6286  Modular Leads And Probes-stand

Designed to meet IEC 1010-2-31, the latest international safety standard for test accessories.
Probe safety jack mates to Pomona’s 5907A, 5908A and 5909A Flexible Test Leads.
Notched probe tip mates into standard 0.080” pin jacks.
Flexible test lead sets are a perfect interface for the most popular multimeters configured with 4 mm
sheathed safety jacks, including Fluke, H-P, Tektronix and Wavetek.
Plug and housing are molded directly to the cable in an integral one piece design and the wire is double
crimped for a long lasting connection.
Multi-leaf banana spring material is Beryllium Copper, nickel plated for extended insertion cycle life
and low contact resistance.
High strand count silicone insulated wire offers excellent flexibility and high temperature resistance.
Test leads can mate to a broad assortment of Pomona probes, alligators, spade lugs, etc.
PDF  [PDF Help]

  6288  Modular Leads And Probes-stain

Designed to meet IEC 1010-2-31, the latest international safety standard for test accessories.
Probe safety jack mates to Pomona’s 5907A, 5908A and 5909A Flexible Test Leads.
Stainless Steel tip mates into standard 0.080” pin jacks.
Flexible test lead sets are a perfect interface for the most popular multimeters configured with 4 mm
sheathed safety jacks, including Fluke, H-P, Tektronix and Wavetek.
Plug and housing are molded directly to the cable in an integral one piece design and the wire is double
crimped for a long lasting connection.
Multi-leaf banana spring material is Beryllium Copper, nickel plated for extended insertion cycle life
and low contact resistance.
High strand count silicone insulated wire offers excellent flexibility and high temperature resistance.
Test leads can mate to a broad assortment of Pomona probes, alligators, spade lugs, etc.
PDF  [PDF Help]

  6320-96  Bantamy/r J48 Cable

Shielded cable to reduce noise.
Bantam Plugs molded to the cable to provide optimum durability.
MATERIALS:
Plugs: Nickel Plated Brass.
Main Cable: 4 Conductor Shielded Twisted Pair.
Breakout Cables: 2 Conductor Shielded Twisted Pair.
Wire Jackets and Insulators: PVC
Breakout: Molded PVC
RATINGS:
Voltage: Hands free usage in controlled voltage environments: 300 Vrms Max. For CE compliance: not
intended for hand-held use at voltages above 33 Vrms/70 Vdc.
Current: 0.5 Amperes per conductor @ 25°C Max.
Operating Temperature: -4°F to +176°F (-20°C to +80°C)
ORDERING INFORMATION: Model 6320-96
Standard Length: 96” Inches (2,43M)
PDF  [PDF Help]

  6341  Precision Electronic Probe Kit

Miniature probe is the perfect size for probing tiny, highdensity
circuits.
Gold plated pogo pin tip keeps constant pressure on test
point for consistent readings.
Replaceable probe tips.
Safety design complies with all the latest standards.
Flexible Silicone insulated wire resists burning.
Right angle DMM plug fits most digital multimeters.
MATERIALS:
Probe Body: Insulation - Gray Santoprene® Rubber over
Polypropylene.
Right Angle Sheath Banana Plug:
Plug Body: Nickel Plated Brass.
Banana Plug Spring: Nickel Plated Beryllium Copper.
Insulation: Santoprene®
Wire: 20 AWG, gray silicon rubber 0.089 (2,26mm) O.D.
Probe Tips: Gold plated or Stainless Steel
RATINGS:
IEC 1010-2-031 Category III, Operating Voltage 1000 Vrms Max. For CE compliance: The 3” (76,19mm) Long Sharp Point
Stainless Steel Tip is not intended for hand-held use at voltage above 33 Vrms/70 Vdc.
Current: 3 Amperes
PDF  [PDF Help]

  6343  Basic electronic test lead kit, hand-held DMM

Test accessories comply with IEC 1010-2-031 and UL requirements
· Test clips with a right angle banana plug is ideal for use with hand held digital multi meter
· Extended slide on tip adapter fits directly over probe, allowing testing of hard to reach test points
· Compatible with most Fluke, H.P., Tektronic & Wavetek digital multimeters
MATERIALS:
Model 5519A: Replacement Probes with Test Leads for Sheathed Style DMM's: Probe Body: Outer Insulation -
Santoprene® Rubber, Color: Gray, Inner Insulation – Polypropylene, Fire Retardant Color: One Black, One Red, Tip:
Nickel plated brass, Wire: 18 AWG, 65 x 36 Tinned Copper, Silicone Insulation, Length: 48” (122cm), O.D. .144"
(3,66mm), Banana Plug: Body – Brass, Nickel Plated, Spring – Beryllium Copper, Nickel Plated, Insulation – PVC,
Color: One Black, One Red, - RATINGS: 1000 VRMS/DC, 10 Amperes, CAT III, P2 Compliant
Model 6264: Alligator Clip Adapter, Body – Steel, Nickel Plated, Insulation - Polypropylene
Spring: Music Wire, RATINGS: IEC 1010-2-031, Category II, P2, 300 VRMS/DC, Current: 5 Amperes.

PDF  [PDF Help]

  6373 Temp Probe 8in Rounded Tip

General purpose temperature probe, for use with gas, air, liquid, gel and surface measurements.
· Extended temperature range; -320 to 1994°F. (-196 to 1090°C.)
MATERIALS:
Thermocouple – Type “K”, Chromel/Alumel
Probe Sheath – Inconel
Cable – AWG #24, Type KX extension wire, insulation gray PVC
Connector Plug – Yellow Hytrel 4776
Handle – Gray Hytrel 5556
RATINGS:
Temperature Range – Probe –320 to 1994°F. (-196 to 1090°C.)
Plug & Handle - -40 to 257°F. (-40 to 125°C.)
Cable - 221°F. (109°C.)
Accuracy - -320 to -156°F. (-196 to -110°C.) + 4%
-156 to -40°F. (-110 to -40°C.) +7.9°F. (+4.9°C.)
-40 to 527°F. (-40 to 275°C.) + 4.0°F. (+ 2.2°C.)
527 to 1994°F. (275 to 1090°C.) + 0.75%
Time Constant – 0.75 seconds max. (100°C. still water @ sea level).
Ungrounded measuring junction.

PDF  [PDF Help]

  6376 Temp Probe Surface Tip

Small measuring junction mass for fast response time.
· Excellent for low conductivity surfaces.
· Junction resists metal fatigue over 10,000 cycles.
MATERIALS:
Thermocouple – “K” Type Chromel/Alumel
Cable – AWG #24, Type KX extension wire, insulation gray PVC.
Connector Plug – Yellow, Hytrel 4776
Handle – Black Valox
Probe Tip – White PTFE
RATINGS:
Temperature Range – 32 to 500°F. (0-260°C.)
Accuracy - + 4°F. (+ 2.2°C.)
Time Constant – 3 seconds max. (100°C water at sea level)

PDF  [PDF Help]

  6530 Automotive Deluxe Test Lead Set

Flexible test leads feature high strand count silicone wire for extreme flexibility and high temperature resistance.
Banana plugs are molded directly to the wire for superior pull strength.
Test Probes, clips, backprobe pins and piercing clip fit directly onto test leads for testing versatility.
Test accessories conveniently store in the tri-fold nylon pouch.
Compatible with most multimeters that accept safety style sheathed banana plugs.

PDF  [PDF Help]

  6723 Test Probes W/ Screw-alligator

Test probe has a Stainless Steel sharp tip with 8/32 threaded base.
Alligator clip screws onto probe tip, eliminating accidental test probe and alligator clip separation.
Test leads fit all standard DMM with safety style banana jacks.
Complies to International Safety Standard IEC 1010-2-031
Materials:
Probe Tip: Stainless Steel, Sharp Tip
Banana Plug: Nickel Plated Beryllium Copper
Alligator contacts: Nickel Plated Steel
Spring: Steel
Probe and Banana Insulation: Triax (Alloy, Nylon, ABS)
Alligator Insulation: Nylon 6
Wire: Silicone
Ratings:
Test Probe: 1000 Vrms, CAT III, 20 A IEC 1010-2-031
Alligator Clip: 300 Vrms , CAT II, 10 A IEC 1010-2-031
Temperature: -10 to +55 C
PDF  [PDF Help]

  6730 Kelvin Lead Set W/ Kelvin

True wire four wire lead set with gold plated alligator clips that open to a wide .800” (20.3mm).
Long leads, over 46” (188 cm)
Standard banana plugs with retractable sheath allows versatility in connecting to equipment.
Color coded for easy source and sense identification.
Materials:
Alligator Contacts: Gold Plated Brass
Banana Plugs: Nickel Plated Beryllium Copper
Spring: Steel
Insulation: Nylon 65, Nylon 6, Lucel, PVC
Wire: Silicone
Ratings:
Voltage RMS: 1000V Cat III
Current: 20 A
Temperature: -10 to +55C
PDF  [PDF Help]

Adapter fit either side of the test lead so any combination of supplied adapters can be made. Set uses standard PVC insulation and has the standard banana plugs & test prods
 

  6232A  Modular Electronic Probes Red and Black

Modular designed for use with Pomona test lead sets, or any other modular test leads with sheathed banana
plugs.
· Notched .080” (2mm) probe tip; notch near probe tip end helps keep probe from sliding off test points.
· Probe tip also mates with 0.080 (2mm) pin tip jacks.
MATERIALS:
Probe Body: Black or Red Polypropylene
Tip: Nickel plated brass, notched .080” (2mm) tip
Jack: Nickel plated brass, .166 (4mm) safety style sheathed banana jack
RATINGS:
IEC 1010-2-031, Category III
Operating Voltage: 1000 Vrms/DC
Current: 10 Amperes
ORDERING INFORMATION:
Model# 6232A (Set includes one black and one red probe)

  
 

● This threaded adapter converts any 8-32 threaded probe tip to a # 10 lug.
MATERIAL = # 10 lug with nickel plated brass insert threaded 8-32 and molded ABS insulator.

SOLD 1 red, 1 black per package.

  5913  Pomona Insulation Piercing Maxigrabber® test clip set

Pierces wire up to 0.14” diameter
· For use with 16 AWG through 23 AWG wire
· Compatible with all Pomona banana plug leads
· Sheathed 4mm receptacle accepts shrouded banana plugs and unshrouded banana plugs
· Meets all the latest international safety standards
RATINGS:
Operating Voltage: CAT III 1000V
Current: 5 Amperes
ORDERING INFORMATION: Model 5913
A set of 1 red and 1 black Maxigrabber test clips.

Stackable Safety Banana Plugs solve the problem of needing more test lead connections when only one jack is available

Covered Plug For Safety - 4 mm Diameter - Stack for Multiple Connections to leads. Easy Access to Open and attach your test lead. SEE PICTURE.