Pomona  1325-0 Solderless Stackup Banana Plug, 10 Per Package, Black

Designed to fit on the end of any 22 AWG to 18
AWG wire.
Cross hole wire entry fits wires up to .12”
(3mm) diameter
Available with tarnish resistant nickel or gold
plating for very low contact resistance
Model 5230 is rated to temperatures up to
+302°F (+150°C)
Set screw simplifies assembly of test leads and
jumpers by using a flat blade screwdriver
Fits standard panel and binding post banana
jacks .161” to .166” (4,0mm to 4,2mm) diameter
MATERIALS:
Banana Jack: Beryllium Copper, Gold Plated
Banana Plug: Body – Brass, Nickel Plated (Model 5406 Gold Plated)
Spring – Beryllium Copper, Nickel Plated (Model 5406 Gold Plated)
Insulation: ABS (Model 5230 Polyphenylene Sulfide)
Set Screw: Steel, Zinc Plated, 8-32 Single Slot
RATINGS:
Voltage: Hands free testing in controlled voltage environments: 5000 Vrms Max. For CE
compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc.
Current: 15 Amps
Maximum Operating Temperature: +122 F (+50 C). Model 5230: +302 F (+150 C)
PDF  [PDF Help]
 

  Pomona 1325-2  Solderless Stack up Banana Plug, 10 Per Package, Red

Designed to fit on the end of any 22 AWG to 18
AWG wire.
Cross hole wire entry fits wires up to .12”
(3mm) diameter
Available with tarnish resistant nickel or gold
plating for very low contact resistance
Model 5230 is rated to temperatures up to
+302°F (+150°C)
Set screw simplifies assembly of test leads and
jumpers by using a flat blade screwdriver
Fits standard panel and binding post banana
jacks .161” to .166” (4,0mm to 4,2mm) diameter
MATERIALS:
Banana Jack: Beryllium Copper, Gold Plated
Banana Plug: Body – Brass, Nickel Plated (Model 5406 Gold Plated)
Spring – Beryllium Copper, Nickel Plated (Model 5406 Gold Plated)
Insulation: ABS (Model 5230 Polyphenylene Sulfide)
Set Screw: Steel, Zinc Plated, 8-32 Single Slot
RATINGS:
Voltage: Hands free testing in controlled voltage environments: 5000 Vrms Max. For CE
compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc.
Current: 15 Amps
Maximum Operating Temperature: +122 F (+50 C). Model 5230: +302 F (+150 C)
PDF

  Pomona 1825 Solderless Stackup Banana Plug With Safety Shield, 10 Per Package, Black
Designed to fit on the end of any 22 AWG to
18 AWG wire.
Cross hole wire entry fits wires up to .12”
(3mm) diameter
Available with tarnish resistant nickel or gold
plating for very low contact resistance
Model 4899 is rated to temperatures up to
+302°F (+150°C)
Set screw simplifies assembly of test leads and
jumpers by using a flat blade screwdriver
Fits standard panel and binding post banana
jacks .161” to .166” (4,0mm to 4,2mm)
diameter
MATERIALS:
Banana Jack: Beryllium Copper, Gold Plated
Banana Plug: Body – Brass, Nickel Plated (Model 4897 Gold
Plated)
Spring – Beryllium Copper, Nickel Plated (Model 4897 Gold Plated)
Insulation: ABS (Model 4899 Polyphenylene Sulfide)
Set Screw: Steel, Zinc Plated, 8-32 Single Slot
RATINGS:
Voltage: Hands free testing in controlled voltage environments: 5000 Vrms Max. For CE compliance: not intended for
hand-held use at voltages above 33 Vrms/70 Vdc.
Current: 15 Amps
Maximum Operating Temperature: +122 F (+50 C). Model 4899: +302 F (+150 C)
PDF  [PDF Help]

# 1825-0 BLACK COLOR   [Order Here]
# 1825-2 RED COLOR

# 1269   [Order Here]

# 1270   [Order Here]

Enables interconnection between telephone equipment and BNC based test instruments.
· Readily adapters standard phone jacks for BNC Cables.
· BNC (Female) contact is gold plated Beryllium Copper for noise free connection.
· Adapter is tarnish resistant for good lab appearance.
MATERIALS:
BNC (Male): Body – Brass, Tarnish Resistant
Center Contact: Beryllium Copper, Gold Plated
Dielectric: PTFE
Handle: Brass, Nickel Plated
Phone Plug (Two Conductors): Brass, Nickel Plated
RATINGS:
Operating Voltages: 500 VRMS
Operating Temperature: +125°C (+257°F)
Impedance: 50 Ohms
# 1297   [Order Here]

Ideal for Connecting Power Supply or Test Equipment to Bread Boards
· Double Banana Plugs Mates to Pomona Models 2269, 5233 and 4243.
· Single Banana Plugs Mate to Pomona Model Numbers 1581, 2854, 4900 and 3760.
MATERIALS:
Banana Plugs:
Plug Body: Brass, Nickel Plated
Spring: Beryllium Copper, Nickel Plated
Insulation: Polypropylene Molded to the Plug Bodies and Cable, Color: Gray
Marking: POMONA ELECTRONICS CO. INC. POMONA CALIFORNIA
Cable: 18 AWG, Stranding 65 x 36 t.c., PVC Insulated, .250” (6,35 mm) O.D., 2 conductor twisted pair
Marking: Pomona 1368-A-*
Color: Gray
Molded Breakout:
PVC Molded to the Breakout Leads and Cable. Color: Gray
Breakout Leads:
20 AWG, Stranding 41 x 36 t.c., PVC Insulated, .087” (2,21 mm) O.D.
Colors: One Red, One Black
RATINGS:
Operating Temperature: +50°C Max.
Operating Voltage: 300 VRMS.
ORDERING INFORMATION: Model 1368-A-XX
XX = Wire Length, Standard Lengths: 18” (457,2cm), 24” (60,96cm), 30” (762,0cm),
36” (91,44cm), 48” (121,92cm), 60” (152,4cm). Additional lengths can be quoted upon request.
* = Color, -0 Black, -2 Red. Ordering Example: 1368-A-24 Cable assembly is 24” (60,96cm)
# 1368-A-36   [Order Here]

Accepts cable size types RG 58 and RG 142.
MATERIALS:
Material: Cold rolled steel No.2 temper ½ hard.
Finish: Baked enamel.
Color: FED-STD-595A #22356, Orange.
# 1508  [Order Here]

Converts BNC (male) cables / connectors to alligator test clips for test versatility.
BNC connector is molded directly to the wire for pull strength durability and dust and moisture resistance.
BNC center contact is gold plated Beryllium Copper for corrosion resistance, low contact resistance and long
insertion life.
Alligator clips attach to terminals up to .300” (7.6mm) diameter.
Black wire is connected to BNC shell, red wire to BNC center contact.
MATERIALS:
BNC: Nickel Plated Brass, Center Contact: Gold Plated Beryllium Copper
Dielectric: PTFE
Wire: 18 AWG, PVC Insulated
Alligator: Nickel plated steel, Spring: stainless steel
Boot: Vinyl, color matches color of wire.
RATINGS:
Operating Voltage: Hands free testing in controlled voltage environments: 150 VRMS Max.
Operating Temperature: +122°F (+50°C) Max.
# 2630   [Order Here]

Accepts cable size types RG 213 and RG 214.
MATERIALS:
Material: Cold rolled steel No.2 temper ½ hard.
Finish: Baked enamel.
Color: FED-STD-595A #25109, Blue.
# 2708 [Order Here]

 

Converts BNC cables with male plugs to stackable banana plugs for versatility
· BNC connector and banana plugs are molded directly to the wire for pull strength durability and dust and
moisture resistance
· BNC center contact is gold plated Beryllium Copper for corrosion resistance, low contact resistance and long
insertion life
MATERIALS:
BNC: Nickel plated brass
Center Contact: Gold plated Beryllium Copper
Wire: 18 AWG, PVC
Marking: “Pomona 3073”
Banana Plugs: Nickel plated brass
Spring: Nickel plated Beryllium Copper
Insulation: Polypropylene, red and black
RATINGS:
Operating Voltage: Hand-held testing: 30VAC/60VDC Max.
Hands free testing in controlled voltage environments: 500 WVDC Max.
Operating Temperature: +55°C (+131°F) Max.

 

Grabber hooks attach to terminal sizes up to .060” (1,5mm) O.D.
· Converts BNC (Male) cables to Minigrabber® Test Clips for test versitiliy.
· BNC connector and grabber cap are molded directly to the wire for pull strength durability and dust/moisture
resistance.
· Grabber hook and BNC center contact are beryllium copper for superior strength.
· Gold plating of grabber hook and BNC center contact offers optimum corrosion resistance and low contact
resistance to ensure test signal integrity.
· Schematic: Black grabber to BNC shell, red grabber to BNC center contact.
MATERIALS:
BNC: Body – Brass, Nickel Plated, Center Contact – Beryllium Copper, Gold Plated.
Wire: 20 AWG, Stranding 41 x 36 T.C., PVC Insulated, .087” (2,21 mm) O.D.
Marking: “POMONA Model 3788”, Color matches Grabber.
Grabber: Contact – Beryllium Copper, Gold Plated
Spring – Stainless Steel
Insulation – Glass Filled Nylon. Color: one red, one black
RATING:
Voltage: 45 VRMS
Operating Temperature: +55°C (+131°F) Max.

 

Grabber hook attaches to terminal sizes up to .060” (1,5mm) O.D.
· Converts BNC (Female) connects to Minigrabber® Test Clips for test versatile.
· BNC connector and grabber cap are molded directly to the wire for pull strength durability and dust/moisture
resistance.
· Grabber hook and BNC center contact are gold plated beryllium copper for optimum strength, excelleREDnt
corrosion resistance and low contact resistance to ensure test signal integrity.
· Schematic: Black grabber to BNC shell, red grabber to BNC center contact.
MATERIALS:
BNC: Body, Brass - Nickel Plated, Center Contact - Brass, Gold Plated
Dielectric: PTFE
Body to Wire Insulation: Polypropylene Molded to BNC and Wire, Marking: “3789”, Color: Black
WIRE: 20 AWG, Stranding 41 x 36 T.C., PVC Insulation .087” (2,21 mm) O.D., Color Matches Minigrabber
MINIGRABBERÒ TEST CLIP: Contact: Beryllium Copper, Gold Plated
Insulation: Glass Filled Nylon, Color: One Red, One Black
Marking: “Pomona Electronics”, “MinigrabberÒ”
RATINGS:
Operating Temperature: +55°C (+131°F) Max.
Voltage: 45 VAC

 

Body: Contact – Gold Plated Beryllium Copper, Spring – Stainless Steel
Insulation: Glass filled nylon.
Marking: “Pomona 3925”
RATINGS:
Voltage: Hand-held testing: 30VAC/60VDC Max.
Hands free testing in controlled voltage environments: 300 WVDC Max.
Operating Temperature: +102º(+216ºF.) Max.
Current: 5 Amperes
ORDERING INFORMATION: Model 3925
Standard Colors: Available in 10 colors: -0 Black, -2 Red, -3 Orange, -4 Yellow, -5 Green, -6 Blue,
-7 Violet, -8 Gray, -9 White
Sold in packages of 10 per color.

 

Body: Contact – Gold Plated Beryllium Copper, Spring – Stainless Steel
Insulation: Glass filled nylon.
Marking: “Pomona 3925”
RATINGS:
Voltage: Hand-held testing: 30VAC/60VDC Max.
Hands free testing in controlled voltage environments: 300 WVDC Max.
Operating Temperature: +102º(+216ºF.) Max.
Current: 5 Amperes
ORDERING INFORMATION: Model 3925
Standard Colors: Available in 10 colors: -0 Black, -2 Red, -3 Orange, -4 Yellow, -5 Green, -6 Blue,
-7 Violet, -8 Gray, -9 White
Sold in packages of 10 per color.
 [Order Here]

 

Accepts cable size types RG 59 and RG 108.
MATERIALS:
Material: Cold rolled steel No.2 temper ½ hard.
Finish: Baked enamel.
Color: FED-STD-595A #27038, Black.

 

This Minigrabber test clip has a standard banana jack built right into the plunger.
Excellent for attaching the Grabber test clip directly to the end of a banana plug patch cord.
MATERIALS:
Contact: Beryllium Copper per QQ-C-533, Alloy 165, ¼ HM.
Spring Stainless steel #302
Banana Jack: Brass per QQ-B-626, Alloy 360, ½ Hard.
Finish:
Contact: Gold plated per MIL-G-45204, Type I, Class 00
Banana Jack: Nickel plated per QQ-N-290, Class 1, 200/300 microinches.
Insulation:Glass filled Nylon.
RATINGS:
Operating Temperature: +102 C. (+216 F.) Max.
Operating Voltage: Hand-held testing: 30VAC/60VDC Max.
Current: 5 Amperes
ORDERING INFORMATION: Model 4723-*
*=Color, -0 Black, -2 Red,
Ordering Example: 4723-2 Adapter Color is Red.

 

This Minigrabber test clip has a standard banana jack built right into the plunger.
Excellent for attaching the Grabber test clip directly to the end of a banana plug patch cord.
MATERIALS:
Contact: Beryllium Copper per QQ-C-533, Alloy 165, ¼ HM.
Spring Stainless steel #302
Banana Jack: Brass per QQ-B-626, Alloy 360, ½ Hard.
Finish:
Contact: Gold plated per MIL-G-45204, Type I, Class 00
Banana Jack: Nickel plated per QQ-N-290, Class 1, 200/300 microinches.
Insulation:Glass filled Nylon.
RATINGS:
Operating Temperature: +102 C. (+216 F.) Max.
Operating Voltage: Hand-held testing: 30VAC/60VDC Max.
Current: 5 Amperes
ORDERING INFORMATION: Model 4723-*
*=Color, -0 Black, -2 Red,
Ordering Example: 4723-2 Adapter Color is Red.

 

Model 5295 is part of a family of test accessories ideal for low voltage precision measurements.
· Designed to greatly minimizes the effect of Thermal Electric Voltage (Thermal EMF). Therma1 EMF is generated at the junction of dissimilar metals at different temperatures and is a common source of error in low micro and nano volt measurements.
· Banana plug materials feature gold plated Tellurium Copper body and gold plated Beryllium Copper spring for low thermal EMF.
· Spade lug is of high conductivity Electrolytic Tough Pitch (ETP), 110 Copper Alloy.
· Banana plug is designed with retractable sheaths for versatile use in safety sheathed or non-sheathed jacks.
· Banana plugs are attached to low resistance multi-stranded 12 gauge wire.
MATERIALS:
Retractable Sheath Banana Plug:
Plug Body - Tellurium Copper, gold plated
Plug Spring - Beryllium Copper, gold plated
Tip - Nylon 6, color matches wire.
Compression Spring - Stainless steel
Insulation - Nylon 6, Color matches wire.
Wire: 12 AWG; Stranding 7 x 38/36 Bare Copper, PVC Insulated, .144” (3,66 mm) O.D.
Marking: “Model 5295-XX-*”
Spade Lug: Electrolytic Tough Pitch (ETP), 110 Copper Alloy, ½ Hard, Gold Plated
Insulation: Polypropylene molded to spade lug body and wire, color matches wire.
RATINGS:
Operating Temperature: +55° C (+131°F) Max.
Operating Voltage: 1000 VRMS/DC
Current: 7 Amperes. Continuous

 

Ideal for providing temporary jumper wires.
· Provides excellent connector to terminals and wire wrap posts.
MATERIALS:
Minigrabber® Test Clip.
Material: Contact - Beryllium Copper
Spring – Stainless steel
Finish: Contact – Gold plated
Insulation: Glass filled nylon. Color matches color of wire.
Wire: 20 AWG, PVC insulated
Marking: “POMONA 3781-*”
Color: See Ordering Information.
RATINGS:
Operating Temperature: +102ºC. (+216ºF.) Max.
Voltage: Hand-held testing 30VAC/60VDC Max.
Hands free testing in controlled voltage environments 300 WVDC Max.
Current: 5 Amperes
*= Color, -0 Black, -2 Red, -1 Brown, -3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White.

  Pomona 6084  Wrist Strap W/clip & Cord

For users who prefer a metal wrist strap with adjustability.
· Featuring a flexible band that will not pinch or pull hair.
· Supplied with adjustable links to assure a secure and comfortable fit.
· A standard 4mm snap stud allows attachment to resistive coil cord and alligator clip (provided).
SPECIFICATIONS:
Wrist Strap
· Strap Material: Stainless Steel non-rusting per MIL-STD 202 Mthd. 101
· Color: Blue
· Elasticity: Expansion: 1.5:1
· Weight: ~33 grams
· Resistance: Band Interior: <150 Ohms
· Snap: Post 4mm
Cord
· Length: 6 feet or 12 feet expanded.
· Resistor: 1 MOHM
· Color: Black
· Snap: 4mm
STANDARDS:
· Meets the requirements of ESD Standard 1.1, ANSI ESD S-20.20, MIL-STD1686, and
MIL-HDBK-263, and EIA 625.

PDF  [PDF Help]