Action-Electronics.com Since 1972 - Santa Ana CA.

Tel 800-563-9405 or (714) 547-5169

NO Minimum Orders
NO TAX Outside CA
MAP and Location

Payment, Shipping & Order Options - General Help - FAQ - RETURNS

SURPLUS - International
[PDF Help] [Order Form For Quoted Items]

Is It In Stock?
When Will You
Get Your Order?

• Voice Alert - Wireless Motion Detection With Voice Warnings
• I-VU - Electronic lighted Magnifier. Too Cool Not to look at!

NAVIGATE

PRINTED CIRCUIT BOARDS Proto-Boards, GC Electronics Positive Etch System, Datak, Etching Solution...

Pre Sensitized PCB's	Copper Clad PCB's	Etching Solution	Prototyping Boards	MFG Chemicals
Small PCB's	Power Etching System	Etching Trays	Panel Meters	BREAD BOARDS

PCB - With Pad-Per-Hole Small Drilled Pad-Per Hole PCB's

COPPER ONE SIDE, PAD PER HOLE PCB's

SOLDER-ABLE PERF BOARD
Copper clad mounting holes with 0.1”
matrix. Fits most standard components.
Mating project enclosures available.

Small Plastic Boxes With Metal Bottom Plate

Easy to drill and work with plastic housing with metal bottom plate
Enclose your projects, prototypes, switches or wire junctions.
PROJECT ENCLOSURES
Heavy duty molded plastic boxes with
aluminum tops. Mating Solder-able perf-boards available.
Measurements in inches. Dimensions are Outer Diameter.

Positive Etch System: Basic

1. You will need a pre-sensitized PCB, or sensitize a copper clad PCB.
2. An etch resist pen to draw or a layout (Mylar transparency) to go on the PCB.
3. Then expose the PCB to U/V Light. The sun, sun lamp Etc.
4. Develop the PCB with 22-226 Developer.
5. Etch the PCB with PCB etching solution.
(If you use the etch resist pen, you might want to get #22-240 Stripping Solution to clean off the ink)

Check the Power Etching System

Go to the GC Electronics Page for other related items!

gc22394.jpg (5359 bytes) PCB POWER ETCHING SYSTEM

Professional PC Board Power Etching System A semi-automatic etching device for use in labs, schools, prototype shops and for limited PC board production. Reduces etching time to minutes. Air pump agitates etching solution for fast, very even etches. Handles up to two 8" X 10" PC boards at a time, either single or double sided. Tank comes with a tip-proof wire stand that can remain portable or attached to the bench with screws. For professional labs, it can be mounted as a bench well. Boards fit into a submersible rack with handles that keep hands away from the etchant as well as separating the PC boards. Lid prevents splashes, reduces evaporation, and can be turned upside down and used as an auxiliary tray. Kit contains: 1 Etching Tank and Reservoir Lid (12"H x 2-1/2"W x 10-1/2"L) Molded Polyethylene – ABS PC Board Holder Capacity – 1.25 Gallons of Etching Solution 1 Etch-O-Matic Power Agitating Pump, 120V AC Operation 1 Permanent or Portable Tip-Free Base 1 PC Board Holder and Handle 4 Feet of Supply Hose

gc22392.jpg (2588 bytes) Greatly reduce etching time with the etching solution heater!

10 increments of 5° temperature settings
Fits in tank and heats solution up to 38°C
(100°F). Used to further reduce etching time. Built-in adjustable thermostat controls temperature continuously to 100°F. 120V AC/100 W Max.

PCB STARTER SYSTEM

Etching System Includes:
1.35 Gallon Etching Tank: Can accommodate up to (2) 8 x 9 inch boards at a time. Non-Evaporative Lid.
Etching Solution Heater: Raises temperature to greatly reduce etching time
Air Pump & Agitator :For faster, even etching of your board
Perfect starter kit!

PCB ETCHING SOLUTION

PC Board Etching Solution
This ferric chloride solution is one of the most effective and safest etching materials for copper clad PC boards. 6 oz. will etch about 180 sq. inches of PC board. Use only in plastic or glass trays. pH. 1.57.
Catalog Page in [MSDS]

TINNIT® TIN PLATING Kit

Tinnit® will plate a copper clad board with a bright, protective tin plate approximately .0004" thick. Enhances solderabilty, resists oxidation and provides a professionally appearance.
Supplied as a dry concentrate, kit contains enough to plate approximately 600 sq. inches.
Kit includes a 16 oz. bottle for storing Tinnit between uses.
Tray and handling tool included; you may wish to wear plastic gloves.
Tinnit® Kit Complete no. 12-800
Tinnit® dry-Concentrates only 1 pint size no. ER-18
MSDS

ProtoBox Kits with board and Hammond box.

A series of Protoboards that include a well made box from Hammond, one of our industry’s leading box makers. If you need to replace the board due to circuit changes, each of the ProtoBox circuit boards included in these kits is also sold separately. Note: please be sure to use the Philmore part numbers when ordering, all of which begin with the 12– prefix (example (12-200 etc.) We do show Hammond numbers on packages for your convenience, but our systems will recognize only the Philmore numbers.

PDF of Product Details [PDF Help]

3U / 6U & EUROCARD / VME PROTOBOARDS

PDF of Product Details [PDF Help]

PCB ETCHING Trays

Developing and Etching Trays
Two plastic trays (5-1/4" x 7-1/4" I.D.) for positive method developing and for etching. One aluminum tray for rinsing
(4-1/4" x 6-3/4" I.D.).
Set of 3
Cat. No. 22-284
High Grade Blk Plastic

Two plastic trays (5-1/4" x 7-1/4" I.D.) for positive method developing and for etching.
One aluminum tray for rinsing (4-1/4" x 6-3/4" I.D.). Set of 3
# 22-284 $13.45

GC Electronics Pre-Sensitized PCB's

Not drilled. Positive Acting. For exposure to UV Light.
Glass Epoxy Composite, 1/16 inch thick.
COS=Copper on One Side.
CBS=Copper on Both Sides
Positive Acting

# 21-243 (3x6 Pre-sensitized PCB COS) $3.85

# 21-334 (4x6 Pre-sensitized PCB COS) $4.99

# 21-350 (6x6 Pre-sensitized PCB CBS) $8.50

# 21-353 (6x9 Pre-sensitized PCB CBS) $12.50

# 21-338 (6x9 Pre-sensitized PCB COS) $10.25

# 22-074 (Pos. Etch Sensitizing Spray) NLA No Longer Available

POSITIVE Etch Instructions [CLICK HERE]

1 oz. PLAIN COPPER CLAD PCB's

COPPER ONE OR BOTH SIDES
1/16 inch Thick

PCB MFG. Items

Etch Resist Ink Pens

Black felt tip pens for marking nomenclature and touching up photo artwork or etch resist circuits directly on the PC board or on the positive. Dries instantly.
Easy application. Can be removed with Stripping Solution (22-240) or alcohol.
Std. Size – draws lines approx.
1/32" wide
Cat. No. 22-220
Fine Line – draws lines as thin as
1/64" wide
Cat. No. 22-222

Stripping Solution

Removes remaining etch resist from PC boards. Removes any coating that remains over the copper after etching which may interfere with the soldering of the component leads to the PC board. 2 fl. oz. [59 ml.] Bottle

Pure Copper Circuit Tape

6-foot roll of self-adhesive pure copper tape for quick repairs or circuit modification. Adheres readily to PC boards and similar surfaces; solders readily. Flexible enough to be used around corners, between PC boards, between board and chassis, etc. Extremely low resistance (.002” thick). Supplied on 1” I.D. core.
1/16" wide-Cat. No. 22-507 [NLA]

1/8" wide
Cat. No. 22-509

Positive Type Developer Concentrate

For developing photo sensitized PC boards coated with positive type etch resist. To be diluted with 9 parts of water to 1 part of developer. 8 oz. will develop 10 to 20 sq. ft. of PC board.

PDF of Product Details [PDF Help]
PDF of Product Details
PDF of Product Details
PDF of Product Details
PDF of Product Details
PDF of Product Details
PDF of Product Details

PCB Prototyping Board om2300l.jpg (23248 bytes) om2300t.jpg (18092 bytes) om9400t.jpg (17293 bytes)

Prototyping Boards
PDF of Product Details [PDF Help]

[Go to the GC Electronics Page for other related items!]

SEARCH Our Website SEARCHING FOR IC's-TRANSISTORS-DIODES TRIACS-BRIDGES-OTHER SEMICONDUCTORS- ETC...? [CLICK HERE] Search for: Match any search words Match all search words SEARCH TIPS EXPAND YOUR SEARCH BY USING "MATCH *ANY* SEARCH WORDS" 123 will show everything with 123 within it. xxx123 xxx123xxx 123xxx ETC. USE "". TO SEARCH FOR (=everything) EVERYTHI* or RYTHING or EVERY* USE "?". TO SEARCH FOR (?=Single Digits) EVERYTHI??? or ????RYTHING or EVERY????? LOOKING FOR 12-1234, ALSO TRY 121234, 12-1234 ETC... Leave off the part number prefix. Instead of XX-12345 search for 12345 or 12345*	Action Electronics 1300 E Edinger Ave-Santa Ana-CA-92705 Tel (800) 563-9405 or (714) 547-5169 FAX: (Scan & Email Us...) Hours: M-F 8am-4pm PST 11am-7pm EST
	Calculator To Refer This Web Page URL to a friend, Enter their email address Here: And Click Send...
Secure Shopping cart	In stock quantity is not [tracked] on the website therefore not reflected at time of order. \| Save Bucks! Be Cool! Join Our Email List! \|