PANAVISE, PANAVISE VICES, PANAVISE WORK CENTERS, VICE BASE MOUNTS, VICE WORK CENTERS, VICE JAWS

Popular Combo's

"The Vise!" Hold it at just about any angle with the rugged space saving Panavise Mainstay.

A combo of the #300 Base and #303 Head. This is the mainstay of the Panavise Line- We first got ours in about 1972 and it's still in use to this day, gone through a few sets of jaws, but they're cheap and easy to replace...
Jaws open to 2 1/4" (58mm). Jaws are 2 1/2" wide (64mm).
The stem is 2 1/8" (54mm) long and 5/8" (16mm) in diameter.
Nylon jaws have a satin finish to improve grip. Steel, brass, PTFE® and grooved nylon jaws are available as accessories for this head.
As a general purpose head, you can't go wrong with its exceptional strength and quality.

Panavise Jr. is a small and affordable vise that will become an indispensable third hand!

This popular and small vise has all the tilt, turn and rotate features of the big boys. Fine and coarse adjustment for the jaws that open to 2 7/8". Comes complete but not interchangeable with other heads/bases.

You will get more than your moneys worth from this one. 

Panavise Work Center 324

Electronic Work Center - Model 324
The PanaVise Electronic Work Center is a complete and economical work bench combination.
It delivers a set of circuit board holders, all the "tilt, turn and rotate" control of a 300 Standard Base, the convenience of a 312 Tray Base Mount and a 371 Solder Station.
Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm) thick. Arms move independently.
Add the 318 Accessory Cross Bars and the bar width can be extended from 14" (355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide.
Arms move independently and may be positioned adjacent to each other. Additional sets of arms (Model 316) are available for dual or multiple board use.
All parts, tooling, wire, soldering iron and PC Boards are located exactly where you want them. Sturdy and stable.
The 324 Electronic Work Center stands 13 1/2" (342.9mm) tall and weighs 4lbs. 8oz. (2kg).
 

+

This head is a versatile, general purpose electronics head created especially for production lines, technicians, and designers.

Jaws open to 6" (164mm) to accommodate most PC boards in its molded, deep-ribbed neoprene jaw pads. When pads are reversed, the wide "V" can be used for securing delicate items, such as tuners, coils, motor armatures, etc.
The jaw's control knob is micro-adjustable so it exerts the exact amount of pressure you need.
Fits all 300 series bases
The stem is 2 1/4" (58mm) long and 5/8" (16mm) in diameter.
Overall height is 5 1/8" (131mm). Add a Base Mount! - Extra Jaws

+

The Vacuum Base is in wide use for portable applications. Simply flip the lever to "activate" the rubber base and attach the unit to any non-porous surface.
Holds all 300 series heads.
Accepts all 5/8" (16mm) stems.
Overall height is 3 1/4" (83mm).
Pad repair kits also available.
Extra or Different Jaws

+

The Low-Profile Head has the same basic mechanical features as the 303 Standard Head, except that the stem is cast into the base of the head to allow close positioning to the work surface.
When used with the low profile base (Model 305) the head can be swung out and away from the bench surface.
Fits all 300 series bases
Jaws open to 2 1/4" (58mm). Jaws are 2 1/2" wide (64mm).
The stem is 1 5/8" (42mm) long and 5/8" (16mm) in diameter.
Steel jaws may be interchanged with any of the accessory jaws. Extra or Different Jaws
Overall length is 7 3/4" (199mm). Add a Base Mount!

+

 Accommodates PC boards of any shape and size, from 1/8" (3mm) to 12" (308mm) wide and 5/32" (4mm) thick. Add the 318 Accessory Cross Bars and the bar width can be extended from 14" (359mm) to 30" (769mm) to hold boards up to 28" (718mm) wide. Arms move independently and may be positioned adjacent to each other. Additional sets of arms (Model 316) are available for dual or multiple board use. The stem is 5/8" (16mm) in diameter. Overall height (including stem) is 10 7/8" (279mm)  Add a Base Mount!

Base Mount, Weighted - Model 308

Bench Clamp Base Mount - Model 311

Part Tray Base Mount - Model 312

• The cast aluminum 312 Parts Tray Base Mount attaches to either the 300 Standard Base or the 305 Low-Profile Base.
• Six individual trays are cast into it, much like a "lazy Susan", to neatly hold small parts and tools.
• The Mount is 8 1/2" (218mm) in diameter.
• Included are six non-marring, anti-skid neoprene base pads.
• Three 1/4 - 20 holes are drilled and tapped on the outer lip for mounting accessories.

We use this one. Great when we take the tiny screws out of something I'm working on. Just drop them in the tray. Unless someone else messes with them, they don't get lost.

Magnetic Base Mount - Model 335

Magnet Base Mount - Model 335
Magnetically attaches to any flat, ferrous metal surface.
Perfect for keeping work holding tools on machinery, truck beds, tool boxes, file cabinets...anyplace magnets are not a problem.
Magnet slightly recessed to avoid scratching or marring metal objects.
The Magnet Base Mount is 1/4" (6.3mm) thick.
Magnetic power holds 5 lbs (2.3kgs) at 90°.
Three 1/4 -20 screws for mounting Bases are included.
 

Jaws

Neoprene Jaw Pads - Model 346

•  The reversible 346 Neoprene Jaw Pads are used with the 366 Wide Opening Head and the 376 Self-Centering Head.
• These thick, molded pads have a corrugated surface to firmly hold the most delicate items.
• Flip the pads around and use the wide "V" to hold round objects. 2"W x 1.5"H

Jaws for 303 and 304 Heads
- Models 346,343,344,353

Model 343 - Nylon Jaws, these jaws offer excellent electrical insulation and gentle holding power. Made of type 66 nylon, they will withstand intermittent heat to 300° (149°), or a continuous 200° (193°).

SUCTION CUP MOUNTS FOR CARS AND WINDOWS

SUCTION CUP MOUNT

Window Mount AMP Plate, black


Powerful suction pad attaches to any smooth, flat, non-porous surface — including windshields and side windows
Easily move electronics from vehicle-to-vehicle or remove for security
Electronics mounting plate tilts up and down (locks with knob) and features 20˚¹CTilt in all directions
Ratchet arm has 140˚¹Cmotion; knob locks arm into place
Suction pad is 2.8”(71mm) in diameter
Recommended for electronics weighing less than 2.0 lbs. (0.9kg)
Quick release suction cup tab
For electronics with AMPS-compatible mounting

SUCTION CUP MOUNT

 Window Mount Button Style, black

Powerful suction pad attaches to any smooth, flat, non-porous surface — including windshields and side windows
Easily move electronics from vehicle-to-vehicle or remove for security
Electronics mounting plate tilts up and down (locks with knob) and features 20˚¹CTilt in all directions
Ratchet arm has 140˚¹Cmotion; knob locks arm into place
Suction pad is 2.8”(71mm) in diameter
Recommended for electronics weighing less than 2.0 lbs. (0.9kg)
Quick release suction cup tab
For electronics with button-style mounting

SUCTION CUP MOUNT

 Window Mount Quick Release Plate, black

Powerful suction pad attaches to any smooth, flat, non-porous surface — including windshields and side windows
Easily move electronics from vehicle-to-vehicle or remove for security
Electronics mounting plate tilts up and down (locks with knob) and features 20˚¹CTilt in all directions
Ratchet arm has 140˚¹Cmotion; knob locks arm into place
Suction pad is 2.8”(71mm) in diameter
Recommended for electronics weighing less than 2.0 lbs. (0.9kg)
Quick release suction cup tab
Quickly release electronics from mount
For electronics with AMPS-compatible mounting
Includes 675-BT Quick Release