Vise Heads, Panavise Vise Heads. Panavise

Standard Vice Head Standard Head - Model 303

Fits all 300 series bases
Jaws open to 2 1/4" (58mm). Jaws are 2 1/2" wide (64mm).
The stem is 2 1/8" (54mm) long and 5/8" (16mm) in diameter.
Nylon jaws have a satin finish to improve grip. Steel, brass, PTFE® and grooved nylon jaws are available as accessories for this head.
As a general purpose head, you can't go wrong with its exceptional strength and quality.

Low-Profile Panavise Vise Head Low-Profile Head - Model 304

The Low-Profile Head has the same basic mechanical features as the 303 Standard Head, except that the stem is cast into the base of the head to allow close positioning to the work surface.
When used with the low profile base (Model 305) the head can be swung out and away from the bench surface.
Fits all 300 series bases
Jaws open to 2 1/4" (58mm). Jaws are 2 1/2" wide (64mm).
The stem is 1 5/8" (42mm) long and 5/8" (16mm) in diameter.
Steel jaws may be interchanged with any of the accessory jaws.
Overall length is 7 3/4" (199mm).

Circuit Board Holder vise Circuit Board Holder - Model 315

Accommodates PC boards of any shape and size, from 1/8" (3mm) to 12" (308mm) wide and 5/32" (4mm) thick.
Add the 318 Accessory Cross Bars and the bar width can be extended from 14" (359mm) to 30" (769mm) to hold boards up to 28" (718mm) wide.
Arms move independently and may be positioned adjacent to each other. Additional sets of arms (Model 316) are available for dual or multiple board use.
Fits all 300 series bases
The stem is 5/8" (16mm) in diameter.
Overall height (including stem) is 10 7/8" (279mm)

Wide Opening Vise Head Wide Opening Head - Model 366

This head is a versatile, general purpose electronics head created especially for production lines, technicians, and designers.

Jaws open to 6" (164mm) to accommodate most PC boards in its molded, deep-ribbed neoprene jaw pads. When pads are reversed, the wide "V" can be used for securing delicate items, such as tuners, coils, motor armatures, etc.
The jaw's control knob is micro-adjustable so it exerts the exact amount of pressure you need.
Fits all 300 series bases
The stem is 2 1/4" (58mm) long and 5/8" (16mm) in diameter.
Overall height is 5 1/8" (131mm).

Extra Wide Opening Vise Head Extra Wide Opening Head - Model 376

The double action jaws on the 376 Self-Centering Extra Wide Opening Head allow fast opening and closing.
The self-centering feature lets you hold heavier objects because the weight is centered over the base.
Jaws open to 9" (231mm).
The jaw plates can be reversed to close together, and the reversible jaw pads feature ribbing on one side and a deep "V" groove on the other.
Fits all 300 series bases
The stem is 2 1/4" (58mm) long and 5/8" (16mm) in diameter.
Overall height is 5 1/4" (135mm).

SEARCH Our Website SEARCHING FOR IC's-TRANSISTORS-DIODES TRIACS-BRIDGES-OTHER SEMICONDUCTORS- ETC...? [CLICK HERE] Search for: Match any search words Match all search words SEARCH TIPS EXPAND YOUR SEARCH BY USING "MATCH *ANY* SEARCH WORDS" 123 will show everything with 123 within it. xxx123 xxx123xxx 123xxx ETC. USE "". TO SEARCH FOR (=everything) EVERYTHI* or RYTHING or EVERY* USE "?". TO SEARCH FOR (?=Single Digits) EVERYTHI??? or ????RYTHING or EVERY????? LOOKING FOR 12-1234, ALSO TRY 121234, 12-1234 ETC... Leave off the part number prefix. Instead of XX-12345 search for 12345 or 12345*	Action Electronics 1300 E Edinger Ave-Santa Ana-CA-92705 Tel (800) 563-9405 or (714) 547-5169 FAX: (Scan & Email Us...) Hours: M-F 8am-5pm PST 11am-8pm EST
	Calculator To Refer This Web Page URL to a friend, Enter their email address Here: And Click Send...
Secure Shopping Cart	In stock quantity is not [tracked] on the website therefore not reflected at time of order. \| Save Bucks! Be Cool! Join Our Email List! \|

PANAVISE HEADS How good is your body without a head?