MARINE GRADE BATTERY CHARGERS

Guest Portable Industrial  Marine Grade Battery Charger For Flooded, Gel and AGM batteries- 0.75 AMP
0.75 Amp Portable Charger
Part No. 2601
Description:Total Amps: 0.75 Amps-Number of Outputs: 1 • Batttery Systems: 12VDC • Output Voltage: 12VDC • DC Output: 8' Output wires w/alligator clips & Ring terminals • Input Voltage: 110vAC/60Hz • Input Connection: Standard plug • Dimensions: 3"x 1.8" x 1.2"
Weight: .38 Lb.

Product Features
 • Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Fully Potted to Waterproof Electronics
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM batteries
• 2 - Year Limited Warranty
The 2601 is designed specifically to extend your battery's life in applications where it is stored for long periods of time.
This device is ideal for maintaining 12-volt batteries, keeping them fresh and ready to use. Perfect for any 12-volt
battery application such as classic automobiles, tractors, boats, snowmobiles and motorcycles. The 2601 is a "float"
charger and is superior to traditional "trickle" chargers because its low amperage, regulated output will not boil off the
electrolyte in properly installed and maintained batteries. It supplies just enough electricity to compensate for the
voltage a battery can lose during storage. When attached to your battery and plugged into a standard 115 volt / 60 Hz
AC outlet, the red LED indicator shows that the unit is functioning normally. The 2601 is fully automatic and may be left
unattended indefinitely. (Always check the electrolyte level in your battery monthly.)

Guest Portable Industrial  Marine Grade Battery Charger - 1.25 AMP
1.25 Amp Portable Charger
Part No. 26015-12  • Total Amps: 1.25 Amps • Batttery System: 1-12V • Output Voltage: 12VDC • DC Output: 4' Output wires w/ring terminals  • Input Voltage: 100-130VAC /50-60Hz • input Connection: Wall mount standard plug w/6FT cord • Dimensions: 2.7" x 5.4" x 1.5"

Features
• Reverse Polarity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM batteries
• 2 - Year Limited Warranty
The 26015-12 is a “3-stage” electronic battery charger. Rainproof, lightweight, silent, and completely automatic, it produces 12 Volts DC at a full 1.25 Amps, while using much less AC current than older chargers. After it recharges your batteries, it then supplies just enough power to compensate for the charge that batteries can lose during storage. Unlike automotive “trickle” chargers, the 26015-12 will not boil off the electrolytes in properly installed and maintained batteries. When the 26015-12 is attached to your batteries and plugged into a standard 115 volt / 60 Hz AC outlet, the green LED lets you know the unit is maintaining your batteries.

Guest Portable Industrial  Marine Grade Battery Charger - 2.00 AMP
Meets all Guest Harsh Environment Guidelines
2 Amp Battery Charger
Part No. 2602A-12
Total Amps: 2 • Amps per output: 2 amps • Battery System: One 12 Volt • Output Voltage: 12VDC • DC Output: One 4' DC output cable with ring terminals • Input Voltage: 100-130VAC/50-60Hz • Input Connection: Standard 6FT AC cord with Connect Charge Plug • Dimensions: 5.1" x 2.9" x 1.5"

Features
• Reverse Polarity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Fully Potted to Protect Electronics
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM Batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage
• Meets all Guest Harsh Enviroment Guidelines

Guest Portable Industrial  Marine Grade Battery Charger - 3.00 AMP
3 Amp Portable Charger
Part No. 2603
Description • Total Amps: 3 Amps • Number of Outputs: 1 • Batttery System: 1-12V • Output Voltage: 12VDC • DC Output: 4' Output wires with battery clips •  Input Voltage: 100-130VAC /50-60Hz • Input Connection: 6FT AC cord w/standard plug

Features
• Reverse Polarity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Fully Potted to Waterproof Electronics
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage

Guest Portable Industrial  Marine Grade Battery Charger - 6.00 AMP
6 Amp Portable Charger
Part No. 2606A
Total Amps: 6 • Number of Outputs: 1 • Amps per Output: 6  • Battery System: 12V • Output Voltage: 12VDC  • DC Output: 4' DC output with battery clips • Input Voltage: 100-130V AC/50-60Hz • Input Connection: 6FT AC Cord with molded plug • Dimensions: 5.5" x 5" x 2.4"

Features
• Reverse Polarity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Fully Potted to Waterproof Electronics
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage
• Meets all Guest Harsh Environment Guideline

Power-Sonic Battery Chargers

• Electronically regulated - current limited chargers for sealed lead-acid type batteries.
Wall mount plug-in design for 250, 300, 500, 800 series and 61000A; counter top design for 241000A, 2000, 4000 and 10A series.

 28003
Total Amps: 3 Amps Number of Outputs: 1 Amps per output: 3 Battery System: 24V Input Voltage: 100-130VAC/50-60Hz Output Voltage: 24VDC AC.... More...

28005
Total Amps: 5 Amps Number of Outputs: 1 Amps per output: 5 Battery System: 24V Input Voltage: 100-130VAC/50-60Hz Output Voltage: 24VDC AC.... More...

8 Amp Off Board Mobility Charger 28008
Total Amps: 8 Amps Number of Outputs: 1 Amps per output: 8 Battery System: 24V Input Voltage: 100-130VAC/50-60Hz Output Voltage: 24VDC AC.... More...
 

12 Volt 1,200mA SLA Battery Charger

Easy plug into the wall outlet and connect to your battery
With 2.5mm x 5.5mm DC Power Plug-
"AC Adapter" style. Plugs in the wall outlet with about a six-foot cord. Comes with a DC power plug. Will not overcharge batteries. After battery is charged, it will go into a "trickle Charge" mode. Can be left on continuously - Floating.
More...

6 Volt 800mA SLA Battery Charger

With 2.1mm x 5.5mm DC Power Plug
AC Adapter" style. Plugs in the wall outlet with about a six-foot cord. Comes with a DC power plug. Will not overcharge batteries. After battery is charged, it will go into a "trickle Charge" mode. Can be left on continuously - Floating.

More...

DUAL 6 or 12 Volt Battery Charger Charge either 6volt or 12 volt batteries with a flip of a switch. Charge at either 260mA or 600mA, Alligator Clips for easy connecting.
More...

Is your SLA OK?? Battery Capacity Analyzer For Your SLA Batteries. Perfect for UPS systems, Emergency flood lights, telephone and alarm battery back up.

The need for battery maintenance tools is growing for use in Automotive, Field Service and Maintenance, Telecommunications, and UPS Manufacturing/Maintenance applications. The model 600 is the perfect instrument for anyone working with UPS systems, Emergency back up Flood Lights, Home and Business Security battery.
Measures both No Load Voltage and Battery Capacity.
Displays storage capacity of 12V Lead Acid Batteries as a percentage
Great tool for testing...... More...