|
Join Us!! |
Action-Electronics.com Since 1972 - Santa Ana CA. | Tel 800-563-9405 or (714) 547-5169 |
||
|
NO Minimum Orders |
Payment, Shipping & Order Options - General Help - FAQ - RETURNS |
|||
|
|
|
|||
|
|
|
|
![]() |
![]() |
|
|
|
|
|
|
|
For DeGaussing TV CRT's and Computer Monitors in minutes. |
Great electrical barrier between
transformer and chassis, PC board and frame etc. |
View
the GC Chemicals
- Catalog Page in
|
RED
Insulating Varnish
for protection from humidity,
insulation and against the weatherAlkyd-based compound, especially resistant to environmental extremes including oils, water and most acids and alkalis. Retains its high dielectric strength even if wet and is, therefore, especially adaptable to the insulation of electrical and electronic devices or components which may be operated in a very humid climate and up to 250°F (121°C). For general insulation of coils, transformers, motor windings and for all-around protection against oxidation and atmospheric attacks. [Chemical Shipping Restrictions] - [MSDS] - [SPEC SHEET] Good for Lots of Projects using Transformers 2 fl. oz. [59 ml.] Bottle with Brush. Use [22-209] as a Thinner for brush on applications. |
Thixotropic polyester-base red enamel that will not drip or sag. Excellent adhesion and insulator. Oil and water-proof, for high voltage coils, components, transformers, rotor and field coils in motors. Up to 220°F (104°C) Dielectric properties (1,700 Volts/Mil Min) Dielectric constant 3.7. [Restrictions] - [MSDS] - [SPEC SHEET] |
Use on trailer harness wire connections, other automotive and marine applications where you just don't want regular electrical tape to peel and expose connections to the weather. Heavy-bodied, black insulating coating which replaces insulating tape in applications where wrap-around tape could not readily be applied. This compound dries quickly to a B pliable finish that will not crack, peel or chip. It is water and oil proof and may be used outdoors to insulate any electrical terminal, connection or wire splice. Excellent for providing insulation on handles, etc. Voltage rating 700v/mil (min.)2 fl. oz. [59 ml.] Bottle with Brush. [Restrictions] - [MSDS] - [SPEC SHEET] |
Lacquer with excellent dielectric properties (3,800 Volts/Mil Min) up to 325°F. Quick drying black lacquer insulating coating based on a cellulose resin. [Restrictions] - [MSDS] - [SPEC SHEET] |
High Voltage Putty molds around areas to prevent high voltage arcingSilicone rubber compound with excellent insulating characteristics. It will never harden, will not shrink and has good adhesive properties. Supplied in a blob. Provides a corona and arc suppressing coating in high voltage systems. Especially useful for coating sharp points, edges or corners. Also useful to form gaskets and seals where a putty- like, non-hardening property is desired. (Approx. 550 Volts/MIL Di-electric strength). [MSDS] - [SPEC SHEET] |
Quick Drying waterproof clear cement. Vibration resistant with minimum shrinkage. Great for speaker repair or gluing porous or semi-porous materials together. Not for smooth materials. [RESTRICTIONS] - [MSDS] - [SPEC SHEET] [Limited Supply] |
|
[click here] for complete MSDS listings. |
For thinning polystyrene base coil dopes and cements. 2oz Liquid Just like the Q-Dope below. What a coincidence! [RESTRICTIONS] - [MSDS] - [SPEC SHEET] |
Polystyrene in solvents. Dries fast and clear, protecting coils and transformers with minimal or no effect on inductive values. -10% on 5 bottles or more [RESTRICTIONS] - [MSDS] - [SPEC SHEET] |
|
Industry standard zinc oxide filled silicone heat sink grease for most applications. Will not soften at elevated temperatures or dry out or harden. Meets Mil. Spec. C-47113. 6.5 gm. tube. [RESTRICTIONS] - [MSDS] - [SPEC SHEET] |
Heat Sink Grease
for heat transfer from device to heat sinkIndustry standard zinc oxide filled silicone heat sink grease for most applications. Will not soften at elevated temperatures or dry out or harden. Meets Mil. Spec. C-47113. 1 oz tube. GC-10-8109 [RESTRICTIONS] - [MSDS] - [SPEC SHEET] |
|
Compounded with 100% synthetic base stocks. Features excellent heat transfer efficiency, thermal stability, high flow rate, no separation, bleed or migration typical of silicone based greases. Meets Bellcore Spec. KS21334 and Mil.Spec. C-47113. 1 oz tube. [RESTRICTIONS] - [MSDS] - [SPEC SHEET] |
Parts A and B
Potting Epoxy |
Ferric Chloride for direct etching of printed circuit boards. |
|
PCB Manufacture and
Prototyping Items |
[click here] for complete MSDS listing.
ISOPROPYL ALCOHOL - Pick up only - can not ship.
10-1507-G ALCOHOL-Isopropyl. 1 Gallon
PICK UP ONLY-CALL [MSDS] - [SPEC SHEET] |
MSDS-No Longer Available Discontinued and [NLA] |
|
Radio/TV Cement Solvent. Dissolves cement in speaker cones, spiders, frames, voice coils. Use as thinner for all lacquer type cements. MSDS is not available Special Order Only 10-312 [RESTRICTIONS] - [MSDS] - [SPEC SHEET] |
Special Orders Do Not upset us! Feel free to browse the entire catalog! |
|
EXPAND YOUR SEARCH BY USING "MATCH ANY SEARCH WORDS" *123* will show everything with 123 within it. xxx123 xxx123xxx 123xxx ETC. USE "*". TO SEARCH FOR (*=everything) EVERYTHI* or *RYTHING or *EVERY* USE "?". TO SEARCH FOR (?=Single Digits) EVERYTHI??? or ????RYTHING or EVERY????? LOOKING FOR 12-1234, ALSO TRY *121234*, *12-1234* ETC... Leave off the part number prefix. Instead of XX-12345 search for *12345 or *12345* |
|
|
In
stock quantity is not [tracked]
on the website therefore not reflected at time of order. |