FLUKE DMM, FLUKE CLAMP METERS, FLUKE TEST LEADS, FLUKE TEST CLIPS, FLUKE CARRY CASES, CLAMP METERS, AND ACCESSORIES

Model T5-1000 Voltage, Continuity and Current Testers

Electrical tester with OpenJaw™ Current
The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Available in 600V and 1000V models

LVD1 Volt Light

Non-contact AC voltage detector and LED flashlight combined in one convenient, compact design. With exclusive dual-sensitivity. The voltage detector glows blue when it's near AC voltage, and glows red when it's at the source. Detects voltages from 40 V AC to 300 V AC. Voltage detector glows blue 50 Hz - 60 Hz or 2.5 - 38 cm (1 - 5") away from source. Operating temperature 0 °C to 50 °C. Ultra-bright white LED with 100,000 hour bulb life. AAA battery included.

Fluke Meters 110 Series Features: Online Warranty Registration. True-RMS AC voltage and current for accurate readings on all waveforms. 6000 count display provides improved resolution. Min/Max/Average recording. Frequency, capacitance & resistance capabilities. 112 has a backlight to illuminate the screen in dark workspaces. Easy access battery door to change the battery without breaking the calibration seal. Drop protected to 1 meter. Holster with probe holders for better test lead management. Compatible with ToolPak™ meter hanging kit. Compact & lightweight for use on the go. IEC CAT III 600V safety rating. 3-year warranty

Fluke Digital Multimeter Fluke 115

● TRMS Digital Multimeter
● Resistance, continuity, frequency, capacitance, and diode test
● Measures 20 A (30 seconds momentary; 10 A continuous)
● Large white LED backlight to work in poorly lit areas
● Compact ergonomic design for one-handed operation
● Compatible with optional magnetic hanger (ToolPak™)
● True-rms for accurate measurements on non-linear loads
● Min/Max/Average with elapsed time to record signal fluctuations
● CAT III 600 V safety rated
Includes:
1 - TL75 Test Lead Set, 1 - User's Manual, 1 - 9V Battery

Fluke 110,111,112
110 [No Longer Available] Replaced by 115
111  [No Longer Available] Replaced by 115
112  [No Longer Available] Replaced by 115

Fluke Digital Multimeters 70, 170 Series

Want a smarter meter or a tougher one? Buy one of these and you get both. With features like lifetime warranty. 6000 count resolution. 0.09% accuracy 177,179. Min/Max/Average. True-rms, ac voltage and current. They're all CAT IV rated and sport an easy access door. The 177 and 179 have a backlight. The 179 measures temperature. All told, this is one powerhouse line of digital multimeters. They're all super-simple to use and built tougher than a world champion wrestler.

• True RMS voltage and current measurements
• 0.09% basic accuracy (177, 179)
• 6000 count resolution
• Digital display with analog bargraph and backlight (177, 179)
• Manual and automatic ranging
• Display Hold and Auto Hold
• Frequency and capacitance measurements
• Resistance, continuity and diode measurements
• Temperature measurements (179)
• Min-max-average recording
• Smoothing mode allows filtering of rapidly changing inputs
• Easy battery exchange without opening the case
• Closed case calibration through front panel
• Ergonomic case with integrated protective holster
• EN61010-1 CAT III 1000V / CAT IV 600V
• Measures twice as fast as other Multimeters

PV350C25

• True RMS voltage and current measurements
• 0.09% basic accuracy (177, 179)
• 6000 count resolution
• Digital display with analog bargraph and backlight (177, 179)
• Manual and automatic ranging
• Display Hold and Auto Hold
• Frequency and capacitance measurements
• Resistance, continuity and diode measurements
• Temperature measurements (179)
• Min-max-average recording
• Smoothing mode allows filtering of rapidly changing inputs
• Easy battery exchange without opening the case
• Closed case calibration through front panel
• Ergonomic case with integrated protective holster
• EN61010-1 CAT III 1000V / CAT IV 600V
• Measures twice as fast as other multimeters

PV350 TLK-220USC25
 

Fluke 179
True RMS voltage and current measurements
0.09% basic accuracy (177, 179)
6000 count resolution
Digital display with analog bargraph and backlight (177, 179)
Manual and automatic ranging
Display Hold and Auto Hold
Frequency and capacitance measurements
Resistance, continuity and diode measurements
Temperature measurements (179)
Min-max-average recording
Smoothing mode allows filtering of rapidly changing inputs
Easy battery exchange without opening the case
Closed case calibration through front panel
Ergonomic case with integrated protective holster
EN61010-1 CAT III 1000V / CAT IV 600V
Measures twice as fast as other multimeters
 

PV350 TLK-220USC25

Original Fluke Replacement FUSES

Fluke 87-5

• Extremely fast readings
• 50,000 counts display
• 0.025% basic DC accuracy
• True RMS AC + DC measurements
• 100 kHz AC bandwidth for voltage and current
• Ergonomic high-impact overmolded case
• Dual display with bargraph and two-level backlight
• Min/max/average with real time clock and 250 µs Fast Min-Max
• Frequency, capacitance, duty cycle & pulse width measurements
• Resistance, conductance, continuity and diode measurements
• Temperature and dBV/dBm with selectable reference
• PC interface for data exchange and closed case calibration
• Battery and fuse access without breaking calibration seal
• EN 61010-1 (IEC 1010-1) CAT III 1000V /CAT IV 600V
• Lifetime warranty
• Internal memory allows stand-alone logging of up to 1000 measurements (189 only)
• Readings memory for up to 100 readings (189 only)

TL81AC25

Fluke 187 # 187  [NLA - No Longer Available]

TL81AC25

Fluke 189 [NLA - No Longer Available]

TL81AC25

Clamp Meters [CLICK HERE]

Fluke TPAK
ToolPak™ The meter hanging solution Kit includes, universal hanger clips (2), hook & loop straps (2 lengths) and strong magnet Combine components to meet most hanging needs Attaches to back of a 110/170/180 Series meter, 20/70 -III with integrated holster (with adapter), 724/725 and 50 Series II One year warranty TPAK ToolPak, Meter Hanging Kit © 1995 - 2008 Fluke Corporation

Fluke Model AC280
Sure Grip Hooks SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of nickel plated clips
Profile narrows to 5.6 mm at tip, hook opening 6.4mm at front, 2 mm at base
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
One year warranty

Model AC220
AC220 SureGrip™ Alligator Clips

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of small, insulated, nickel plated jaws
Blunt tip grabs round screw heads up to 9.5 mm
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke AC72 Alligator Clip Set

Slide-on alligator clips (red, black) for TL71/TL75
Jaws provide 8 mm opening
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL220 SureGrip™ Industrial Test Lead Set

Handy all-in-one kit that includes : AC220 SureGrip™ Alligator Clip Set
TP220 SureGrip™ Test Probe Set
TL222 SureGrip™ Silicone Test Lead Set (right to right)
One year warranty

Fluke TL224 SureGrip™ Insulated Test Leads

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on one end and straight connector on the other
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed. One year warranty

Fluke TL75 Hard Point™ Test Lead Set

[NLA - No Longer Available]

TL76 2mm/4mm Test Lead Set

One pair (red, black) 1.5 meter long silicone test leads with right angle shrouded banana plug
Lantern tip (removable) for use with European wall sockets (4 mm Ø )
Lantern tip can be removed for easy access to terminal blocks (2 mm Ø)
Removable, insulated IC caps allow probing on closely spaced leads and compliance with GS38.
Cat IV 600 V, CAT III 1000 V, 10 A rating, UL listed
One year warranty

Fluke TP220 SureGrip™ Industrial Test Probes

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of Industrial test probes
Sharp, 12 mm stainless steel tip provides reliable contact
Flexible finger barrier improves grip
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed. One year warranty

Fluke TL81A Deluxe Electronic Test Lead Kit

Features at a Glance:
The TL81 kit consists of a quadfold nylon pouch containing two each (one black and one red) of the following items:
One meter long test lead with a safety shrouded, right angle banana connector on one end and a stainless steel test probe on the other end, rated up to 10A. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures
Insulated alligator clip rated up to 5A. Insulated probe tip extender rated up to 3A
Modular test probe with banana connector in the handle, rated up to 10A
Modular hook-style clip test lead with banana connector, rated up to 5A
Modular pinch-style clip test lead with banana connector, rated up to 5A
Modular alligator clip with banana connector, rated up to 5A
Slide-on IC probe tip adapter (rated up to 3A) and test lead couplers
Bare spade lug with banana connector, rated up to 10A, CAT III 300V
Compatible with Fluke and other multimeters that accept safety shrouded, standard diameter banana connectors
UL approved. One year warranty

FLUKE ACCESSORIES

Single probe pierces 0.25 to 1.5 mm insulated wire Small pin allows self-healing of the insulation CAT IV 600V, CAT III 1000 V, 5 A rating. UL listed One year warranty

Tough polyprophylene case

1 year warranty

Zippered carrying case with padding and inside pocket. One year warranty

Snap-on holster absorbs shocks and protects meter from rough handling
Y for yellow color. Flex Stand™ allows meter to hand, lean or stand for convenience and best viewing - Built-in probe and lead storage - One year warranty
# C70Y Holster (yellow)  [NLA - No Longer Available]