ChipMax2 is a low cost and high-performance universal device
programmer for PC USB 2.0 interface. It programs a 64 Mbit flash memory in
42 seconds. ChipMax2 supports over 13000 programmable devices with low
voltage (1.8 V). ChipMax2 is the state-of-art universal programmer
offers you the most advanced programming facilities with the most user
friendly interface.
|
 |
 PRODUCT
HIGHLIGHTS |
|
- Universal Programmer with 48-pin Textool Socket
- B/P/V takes 85 Sec. for 8 of 64 Mbit Flash Memory
- Support PC with USB 2.0 Port
- Win 95 / 98 / NT / 2000 / XP
- Internal (110 ~ 250 VAC) switching power supply
|
|
|
|
DEVICES
PROGRAMMED |
|
- M25Pxx, MX25Lxx, S25LFxx, SST25VFxxx
- NAND Flash Memory Samsung K9Kxxx, K5Axxx, K5Fxxx,
M-System MDOC-256 / 512 G Toshiba TC58xxx St-Micro NAND01G
- 28Fxxx, 29Fxxx, 38Fxxx, 29LVxxx, 26LVxxx, 29GLxxx,
29ALxxx, 29Wxxx, 36xxx, 32HFxxx, 34VFxxx, 37VFxxx, 39SFxxx, 39VFxxx,
45LFxxx, 49LFxxx, 50FWxxx
- 27xxx and 27Cxxx series, from 16 Kbit to 32Mbit with
8-bit/16-bit
- EEPROM 27Exxx, 28xxx , and 28Cxxx series
- 256 Kbit to 32 Mbit 28Fxxx, 29Fxxx, 29Cxxx, 29BVxxx,
29LVxxx, 29Wxxx, 49Fxxx series (1.8, 2.7, 3.3, 5.0, or 12 Volt)
- 24Cxx, 24Fxx, 25Cxx, 59Cxx, EPC1/1213/1648, and 93Cxx
- ispLSI(10/20)xx, ispGAL22V10, ispGDS1(2)x, LC40(41)xx
M4Axxx series
- PALCEs, GALs : 16V8, 20V8, 22V10, 20RA10, 26V12 series
- DS12xx, DS13xx, DS15xx, DS16xx series
- PEELs 153, 173, 253, 273, 18CV8, 20CG10 series
- EPLDs PLCxxx, PLSxxx, PLUSxxx, Epxxx, EPCxxx, EPMxxx,
PLDxxx, 5Cxxx, 85Cxxx series
- ATF16/20/22Vxx, ATV750/1500/2500
- MACH1xx/2xx/4xx, and xxx-SP series
- MAX5000, MAX7000 series
- 8741, 8742, 8748, 8749 series
- 87C51/52, -FA, -FB, -FC, '528, '652, '654, '54, 89Cxx,
89Sxx, 89LVxx, 89Cxxxx, DCF85xx, 85(87/89)LPCxxx, PXAxx series 87C751/752
- ST62xx, ST7xx, ST9xx, ST10xx series
- XC17Sxxx, 17Vxxx, 72xx, 73xx, XCF01 / 02 / 04 series
- PIC12Cxxx, PIC16xxx, 17xxx, 18xxx series
- MC68705, MC68HC705, MC68HC711, MC68HC908, MC9S08
- Z86Cxx, Z86Exx series
|
|
|
|
DEVICES
TESTED |
|
- TTL type : 54, 74(S, LS, L, H, HC) series
- CMOS type : 40, 45 series
- Dynamic Memory : 4164 - 1MBit
- Static Memory : 6116 - 6256
- User definable test pattern generation
|
|
|
|
KEY
FEATURES |
|
<Software>
- Supports full WINDOW 95/98/2000/NT and XP.
- Auto search device select function supports E(E)PROMs &
Microcontrollers.
- Device insertion test identifies improperly inserted
device before programming.
- Check for incorrect device insertion, backward,
incorrect position, and poor pin contact.
- High-speed device function tests and user creatable
test library.
- Device Operations: Read,Blank check, Program, Verify,
Checksum, Data compare, Security, Auto(blank check-program-verify), Option
Bit program.
- Display programming parameters and optional bit
information on the screen.
- Set device/buffer address ranges before programming
devices.
- Extensive on-line F1 help system provides text and
graphics.
- User-changeable programming parameters.
- Built-in editor for both buffer date and test vectors.
- Support Binary and all hex files (POF and JEDEC, Intel
Hex, Motorola S Records, Tekhex , straight hex, hex-space, Extended Tekhex,
and others; automatic file type recognition) with Load,Edit, and Save
commands.
- Distribution of 16- and 32- bit data into 8-bit
portions.
<Hardware>
- One on-board FPGA for extremely fast communication.
- Supports real low-voltage support : 5, 3.3, 2.7 and 1.8
volt for programming power.
- Detects all pin locations for poor or damaged pin
contacts.
- External START key allows production programming mode.
- Internal universal power supply,110-240 VAC (no
separate power supply required in foreign country).
- Current limiting protects hardware circuit from
improperly inserted or defective chips and operation errors.
- Standard 48-pin ZIF(Zero Insertion Force) socket
accepts both 300mil and 600 mil DIP devices.
- True universal pin driver hardware.
- Support a high-speed USB2.0 port for PC interface.
- Hardware diagnostic program exams all socket-pin
drivers before using programmer.
- Gang Program Mode allows programmers up to 8 units as
concurrent programming system. (START ALL key enable to program the
programmers simultaneously)
|
|
|
|
PROGRAMMING
SPEED (100 % data in memory) min:sec.00 |
|
| Device P/N |
Read |
Blank |
Prog |
Verify |
Erase |
| AM29F032B |
4.70 |
4.80 |
56.24 |
4.73 |
38.16 |
| AM29LV128ML |
6.70 |
6.65 |
03:26.00 |
6.65 |
- |
| AM29LV256MH |
17.41 |
16.00 |
04:06.16 |
16.77 |
- |
| AM29LV641DH |
4.20 |
4.43 |
42.02 |
4.44 |
- |
AM29LV641DH
(TopMax) |
01:40.00 |
01:38.00 |
04:48.54 |
01:42.00 |
- |
| E28F128J3A |
9.93 |
7.49 |
1:55 |
7.75 |
01:43.30 |
| E28F128J3C |
9.93 |
7.49 |
02:01.80 |
7.75 |
30.31 |
| E28F640J3C |
4.27 |
4.09 |
70.02 |
4.19 |
17.5 |
| K8D3216UTC-T |
2.47 |
2.47 |
22.17 |
2.51 |
- |
| MX26L004BQC |
0.81 |
0.81 |
28.24 |
0.81 |
31.87 |
| MX29LV641MH |
- |
4.86 |
01:10.40 |
4.83 |
- |
| RD38F2040 |
3.09 |
3.09 |
18.71 |
3.09 |
53.47 |
| RD38F4050 |
18.81 |
18.08 |
02:55.4 |
18.30 |
04:41.8 |
* Programming Speed With 100% Data in
Memory , Times in sec.
|
|
|
|
TECHNICAL
SPECIFICATION |
|
ChipMax2 Dimension :
- 1 circuit board with heavy duty case
- Module : 9.5"(L) x 7.0"(W) x 1.5"(H)
- Weight : 1.75 lbs
- Built-in Socket : Textool 48 pin ZIF
|
|
|
|
SYSTEM
REQUIREMENT |
|
- TYPE: 386, 486, Pentium or compatibles. PS/2,
Portable(notebook) computer.
- A hard disk drive (4 Megabytes) is recommended for
software installation / set up.
- PC RAM size: 512K of conventional memory
- I/O PORT: USB 1.1 or 2.0 port
- OS: WINDOWS 95 / 98 / 2000 / NT / XP or greater
|
|
|
|
SAFETY
STANDARD |
|
|
|
|
|
|
STANDARD
ACCESSAORIES |
|
- AC/DC Adapter(110 to 240 VAC)
- USB Cable
- Software CD and User's Guide
|