Wire Cutters, Flush Cut Wire Cutters, Semi Flush Cutters, Diagonal Cutters

4 1/2" Transverse End Cutter with Green Cushion Grips

• Jaw Type Flush
• Jaw Length 7/16 in. Head Width 7/16 in. Head Thickness 9/32 in.
• Tip Dimensions 3/16 in./5 mm Transverse end cutter Flush cutting edge Vertical cutting in tight spaces
• Features green cushion grips

Innovative Cutter / Stripper Combo New & Cool!!!

Finally !! - What do you do 99.9% of the time after you cut a wire? You Strip it!
Now with the same tool, you simply cut the wire, flip that puppy around and strip it. Is that too easy or what!
Self-adjusting stripper works on wire sizes 26AWG to 14AWG.
Catch, hold, and strip wire in one quick motion.
Head is full-flush cutting and low-profile.
Jaws are stainless steel and induction-hardened.
Use on electronic (copper) wire only. We have used these and they work pretty good. Stripper mechanism puts a little more pressure than you are used to on the cutting side but the cut-flip-strip is soooo fast and convenient.

Xcelite Wire Cutters Xcelite Shear Cutters

Sharp Flush Cut for the small wire
Low profile, general-purpose cutter
Superior blade by-pass shear cutting action
Better cuts with half the effort
Greatly reduced mechanical shock delivered to the work
Flush cuts soft wire up to 20 AWG (0.8mm)

Xcelite Cable Slitting Tool

For slitting open multi-conductor cables
Clamp over cable, spin once (Cuts around the cable)
Flip the lever and pull to end of cable (Slits cable exposing the inner conductors)
Adjustable cutting depth for varying insulation thickness

Xcelite 4" Slim Line Tapered Head Cutter with Green Cushion Grips

• Diagonal cutting pliers
• Slim line tapered head
• Semi-flush cutting
• Features green cushion grip

Xcelite 4" Slim Line Tapered Head Cutter with Green Cushion Grips
• Diagonal cutting pliers
• Slim line tapered head
• Flush cutting
• Features green cushion grips

Xcelite 4" Relieved Tapered Head Cutter with Green Cushion Grips
• Diagonal cutting pliers
• Relieved tapered head-flush cutter
• Allows use between closely spaced components
• Features green cushion grips

Xcelite 4" Slim Line Tapered Head Cutter with Green Cushion Grips
• Diagonal cutting pliers
• Slim line tapered head
• Semi-flush cutting
• Features green cushion grip

GC Elect 4.5in Clip & Grip Flush Cutter

Production quality flush cutter for trimming component leads. Retaining device holds clipped ends and prevents them from flying into the eye or remaining in the circuitry. Semi-flush jaws for close trimming and longer life. For copper wire up to .047" diameter.

GC Elect 5 inch Flush Cutters

Production quality flush cutter for trimming component leads or cutting wire.

GC Elect "Palm Grip" FLUSH Cutters

One of the most commonly used cutters and pliers, precision-built with stainless steel working ends and lightweight but durable molded handles. Allows hours of uninterrupted use without the cramped fingers. Spring loaded with minimal travel. Fits in the palm of the hand for easy control during close, delicate work.

Diagonal Cutters - 6 inch

Diagonal Cutters - 6 inch

Well made and very affordable tools
Cushioned grips for comfort

SEARCH Our Website SEARCHING FOR IC's-TRANSISTORS-DIODES TRIACS-BRIDGES-OTHER SEMICONDUCTORS- ETC...? [CLICK HERE] Search for: Match any search words Match all search words SEARCH TIPS EXPAND YOUR SEARCH BY USING "MATCH *ANY* SEARCH WORDS" 123 will show everything with 123 within it. xxx123 xxx123xxx 123xxx ETC. USE "". TO SEARCH FOR (=everything) EVERYTHI* or RYTHING or EVERY* USE "?". TO SEARCH FOR (?=Single Digits) EVERYTHI??? or ????RYTHING or EVERY????? LOOKING FOR 12-1234, ALSO TRY 121234, 12-1234 ETC... Leave off the part number prefix. Instead of XX-12345 search for 12345 or 12345*	Action Electronics 1300 E Edinger Ave-Santa Ana-CA-92705 Tel (800) 563-9405 or (714) 547-5169 FAX: (Scan & Email Us...) Hours: M-F 8am-5pm PST 11am-8pm EST
	Calculator To Refer This Web Page URL to a friend, Enter their email address Here: And Click Send...
Secure Shopping Cart	In stock quantity is not [tracked] on the website therefore not reflected at time of order. \| Save Bucks! Be Cool! Join Our Email List! \|

WIRE CUTTERS, DIAGONAL CUTTERS, SEMI FLUSH CUTTERS, FULL FLUSH CUTTERS, SHEAR CUTTERS, , WIRE SLITTERS