Action-Electronics.com Since 1972 - Santa Ana CA.

Tel 800-563-9405 or (714) 547-5169

NO Minimum Orders
NO TAX Outside CA
MAP and Location

Payment, Shipping & Order Options - General Help - FAQ - RETURNS

SURPLUS - International
[PDF Help] [Order Form For Quoted Items]

Is It In Stock?
When Will You
Get Your Order?

• Voice Alert - Wireless Motion Detection With Voice Warnings
• I-VU - Electronic lighted Magnifier. Too Cool Not to look at!

NAVIGATE

POWER SUPPLIES, BENCH POWER SUPPLIES, B&K, B+K POWER SUPPLIES

Specials! Variable DC Voltage Power Supplies

DC Power Supply PS303D. 0-30 Volts, 0-5 Amps

This unit can also be used as a stabilized voltage supply or stabilized current supply.
The instructions are not very good, but the price is!

Output voltage can be adjusted from 0 voltage to nominal value continually.
It possesses the best degree of stability and corrugation coefficient and perfect protect circuit for overload.
Maximum output current 5A voltage 30V.
Technical Specifications: Voltage of power:115V (50Hz-60Hz)
Working environment:temperature:0-40
Relative humidity: 80%, Store condition: temperature: -10 -70
Relative humidity: 80%, Working status for stabilized voltage:Output voltage will be adjusted from 0 to nominal value continually.
The stabilized degree of voltage. The stabilized degree of power:0.1%+2Mv. The stabilized degree of load:0.1%+2Mv (The maximum current is less than the nominal value).
The stabilized degree of load: 0.1%+5Mv£¨The maximum current is larger than the nominal value.
Corrugation noise: 0.5Vrms (5Hz¡«1MHz, the maximum current less or equal nominal value ).
1.0 Vrms (5Hz«1MHz, the maximum current larger than nominal value).
temperature coefficient: 300ppM. Working status for stabilized current:Output current will be adjusted from 0 to nominal value continually.
The stabilized degree of voltage 0.2%+2 mA. The stabilized degree of load 0.2%+2mA. Corrugation noise : 2 mA Arms.

B&K 1690 Regulated Digital 28A DC Power Supply

B+K High Current DC Power Supplies are designed for continuous duty and are ideal for substituting car batteries. For servicing/demonstrating high power car stereos, cellular phone products, camcorders, and ham radios. Hobbyists, retailers, and service shops use car batteries to power mobile equipment. Car batteries are heavy, leak acid, spark, can't tolerate shorted outputs, and must be recharged. This Power Supply provides it's maximum current output continuously hour after hour without overheating.
Two LED displays
1VDC to 15VDC Variable Output
28A Output at 13.5VDC
Overload protection
High RFI stability
Multiple DC Output Terminals.

The 1696 Programmable Switching DC Power Supply 1-20VDC, 0-9.99A
1 Year Warranty

The 1696 Programmable Switching DC Power Supply uses new switching technologies to offer more power at a lower cost than traditional linear power supplies. The RS 232 interface allows you to either remotely control the power supply or program a sequence of different voltages and current limits that can be used in a automated test application.

• RS 232 interface
• Data logging capability
• Output disable
• Over voltage protection
• Constant voltage operation
• Constant current operation (current limiting)
• Easy-to-use
• Large easy to read LCD displays SPECS
Output Voltage 1 – 20VDC
Output Current 0 – 10A
Ripple & Noise 25mV
Load Regulation 0.5% + 200mV
Line Regulation 50mV
Input Voltage 100 – 265VAC, 50/60Hz
Display meter 4 digit – display LCD Ammeter, Voltmeter and Power meter
Meter Accuracies 1.5% + 2 counts
LCD Module Back light 1.9" x .25“ (48mm x 6mm)
Cooling System Thermostatic Control Fan
Protection Devices Over Temperature, Tracking OVP
Approvals CE
Dimensions (HxWxD) 3.85 x 7.6 x 8.46” (98 x 193 x 215mm)
Weight 6.6lbs. (3Kg)
Supplied Accessories RS 232 cable, PC Software & Manual

PDF Manual Email Request | PDF Data Sheet Email Request

[PRIVACY]

The 1697 Programmable DC power supply, 1-40VDC, 0-5A
1 Year Warranty

The 1697 uses new switching technologies to offer more power at a lower cost than traditional linear power supplies. The RS 232 interface allows you to either remotely control the power supply or program a sequence of different voltages and current limits that can be used in a automated test application.

• RS 232 interface
• Data logging capability
• Output disable
• Over voltage protection
• Constant voltage operation
• Constant current operation (current limiting)
• Easy-to-use
• Large easy to read LCD displays

SPECS
Output Voltage 1 – 40VDC
Output Current 0 – 5A
Ripple & Noise 25mV
Load Regulation 0.5% + 200mV
Line Regulation 50mV
Input Voltage 100 – 265VAC, 50/60Hz
Display meter 4 digit – display LCD Ammeter, Voltmeter and Power meter
Meter Accuracies 1.5% + 2 counts
LCD Module Back light 1.9" x .25“ (48mm x 6mm)
Cooling System Thermostatic Control Fan
Protection Devices Over Temperature, Tracking OVP
Approvals CE
Dimensions (HxWxD) 3.85 x 7.6 x 8.46” (98 x 193 x 215mm)
Weight 6.6lbs. (3Kg)
Supplied Accessories RS 232 cable, PC Software & Manual

PDF Manual Email Request | PDF Data Sheet Email Request

[PRIVACY]

The 1698 Programmable DC power supply, 1-60VDC, 3.3A
1 Year Warranty

The 1698 Programmable Switching DC Power Supply uses new switching technologies to offer more power at a lower cost than traditional linear power supplies. The RS 232 interface allows you to either remotely control the power supply or program a sequence of different voltages and current limits that can be used in a automated test application.

• RS 232 interface
• Data logging capability
• Output disable
• Over voltage protection
• Constant voltage operation
• Constant current operation (current limiting)
• Easy-to-use
• Large easy to read LCD displays

SPECS
Output Voltage 1 – 60VDC
Output Current 0 – 3.3A
Ripple & Noise 25mV
Load Regulation 0.5% + 200mV
Line Regulation 50mV
Input Voltage 100 – 265VAC, 50/60Hz
Display meter 4 digit – display LCD Ammeter, Voltmeter and Power meter
Meter Accuracies 1.5% + 2 counts
LCD Module Back light 1.9" x .25“ (48mm x 6mm)
Cooling System Thermostatic Control Fan
Protection Devices Over Temperature, Tracking OVP
Approvals CE
Dimensions (HxWxD) 3.85 x 7.6 x 8.46” (98 x 193 x 215mm)
Weight 6.6lbs. (3Kg)
Supplied Accessories RS 232 cable, PC Software & Manual

PDF Manual Email Request | PDF Data Sheet Email Request

[PRIVACY]

The 1665 1-19.99V, 9.999A Switching DC Power Supply

The 1665 Switching DC Power Supply uses new switching technologies to offer more power at a lower cost than traditional linear power supplies.

Over voltage protection
Constant voltage operation
Constant current operation (current limiting)
Easy-to-use
Bright easy to read LED displays. [SPECIFICATIONS]

The 1666 1-40V, 5A Switching DC Power Supply

The 1666 Switching DC Power Supply uses new switching technologies to offer more power at a lower cost than traditional linear power supplies.

Over voltage protection
Constant voltage operation
Constant current operation (current limiting)
Easy-to-use
Bright easy to read LED displays.

The 1667 1-60V, 3.3A Switching DC Power Supply

The 1667 Switching DC Power Supply uses new switching technologies to offer more power at a lower cost than traditional linear power supplies.

Over voltage protection
Constant voltage operation
Constant current operation (current limiting)
Easy-to-use
Bright easy to read LED displays.

Triple-Output 30VDC, 5A Digital Display Power Supply
Model#1671A

Variable 0 to 30 VDC, 0 to 5 A variable section

One 12 VDC fixed section
One 5 VDC fixed section
Ideal for general electronic servicing, school electronics labs, and powering up hobbyist's projects

POWER SUPPLIES VIEW B+K PDF CATALOG

1651A Tri-output Power Supply <ORDER> $449 [CLICK FOR YOUR PRICE!]

The model 1651A Triple Output DC Power Supply has two 0 to 24VDC outputs capable of supplying 0 to 500mA, and one fixed 5VDC output capable of supplying up to 4A. Connect outputs in series for higher voltage or connect in parallel for higher current output (switch selectable). Voltage and current metering is provided by two, analog displays. This unit is fully short circuit, overload, and reverse polarity protected.
Two 0 to 24 VDC outputs (0.5A)
One fixed 5V output (4A)
Independent or tracking operation
Adjustable current limiting
Designed to operate continuously at rated output
Short circuit protection, over voltage protection, reverse polarity protection
Connect outputs in series for higher voltage output or in parallel for higher current output (switch selectable)

1653A 0-150v,2a,isolated Power Supply <ORDER> $329 [CLICK FOR YOUR PRICE!]

Variable Isolated AC Power Supply. Model 1653A is a compact, rugged unit.
Variable isolated 0 to 150 VAC
2A continuous output
Displays voltage or current readings
Isolation transformer to eliminate shock hazard while servicing "hot chassis" equipment

1627A 0-30v,3A Digital Display Power Supply <ORDER> $245 [CLICK FOR YOUR PRICE!]
Continuously monitor voltage and current output on two digital meters
Connect two supplies in parallel to double the current output
Connect two supplies in series to double the voltage output
New compact style
Reliable, Durable
Operate continuously at full load without overheating
Fully overload protected
Coarse and fine voltage controls
Great regulation
Very low ripple
Constant voltage or constant current operation

1655A 0-150v,3a,isolated Ac+leakage <ORDER> $539

[Limited To Stock On Hand]
• Variable Isolated AC Power Supply. Model 1655A displays V, A, VA and leakage.
• Variable isolated output 0 to 150 VAC
• 3A continuous, 4A intermittent output
• Built in soldering iron temperature control
• Expanded leakage scale
• Circuit breaker overload protection
• Displays V, A, VA, leakage

1670A Tri-out Dc Power Supply <ORDER> $195 [CLICK FOR YOUR PRICE!]
One variable 0 to 30 VDC, 0 to 3 A variable section
One 12 VDC fixed section
One 5 VDC fixed section
Ideal for general electronic servicing, school electronics labs, and powering up hobbyist's projects

1680 13.8v 6a Power Supply <ORDER> $52 [CLICK FOR YOUR PRICE!]
13.8 volts DC output (fixed)
6 A peak
Current fold back overload protection
Short circuit protection
Reverse polarity protection
Convenient cigar lighter output

1682A 13.8v 15a Power Supply <ORDER> $ 123
13.8 volts DC output (fixed)
15 A peak
Current fold back overload protection
Short circuit protection
Reverse polarity protection
Thermostatically controlled cooling fan

1686A 3-14vdc 12a Power Supply <ORDER> $205 [CLICK FOR YOUR PRICE!]
12 A guaranteed @ 13.8V
Current limiting overload protection
Over voltage protection
Short circuit protection
Reverse polarity protection
Thermostatically controlled cooling fan
Thermal protection
Operates continuously at full load without overheating
Connect two in parallel for more current
Connect two in series for higher voltage

1688A 3-14 Vdc 25a Power Supply <ORDER> $309 [CLICK FOR YOUR PRICE!]
21 A guaranteed @ 13.8V -Current limiting overload protection
Over voltage protection
Short circuit protection
Reverse polarity protection
Thermostatically controlled cooling fan
Thermal protection
Operates continuously at full load without overheating
Connect two in parallel for more current
Connect two in series for higher voltage

1760A (2)0-30,(1)4-6.5 Power Supply <ORDER> $659 [CLICK FOR YOUR PRICE!]
Two 0 to 30 VDC, 2 A sections capable of independent, series or parallel operation
One 4 to 6.5 VDC, 5 A section
Switchable series/parallel operation (30 V sections)
Adjustable current limit controls (30 V sections)
Two 4 digit LED displays, one reads volts or amps of "B" supply, one reads volts or amps of "A" supply or 4 to 6.5V supply
Unique variable tracking, B track A at 5% to 100%

PROGRAMMABLE POWER SUPPLIES VIEW B+K PDF CATALOG

Offering the best cost per watt available to answer virtually any application, this versatile power supply features excellent reliability (50K hrs. MTBF) and user flexibility. You can choose voltages to 35VDC and currents to 6A. Rest assured you'll find the quality you have come to expect from B+K Precision.
Excellent programming resolution and accuracy
Dual range outputs, either 0 to 17.5V, 0 to 6A or 0 to 35V, 0 to 3A
Integral system software makes in case calibration quick and accurate
Large character LCD display assures fast, "easy to read" measurements

Model 1786 are Programmable DC Power Supplies that offer new levels of "ease of use" and programmable functionality. Direct key in entry makes voltage and current selection fast, accurate and easy. In case calibration allows for simple, cost savings, uninterrupted operation.
•Sixteen user programmable preset outputs
•Controllable Output On/Off Switch
•10mV/10mA setability resolution
•Closed case calibration
•Low ripple and noise
•Excellent temperature stability
•Serial interface cable and software included $390.00

0-72VDC, 0-1.5A, Programmable DC Supply w/RS232 Interface
Model 1787B

1787B Power Supply Rs232 <ORDER> $390 [CLICK FOR YOUR PRICE!]
Model 1787A Programmable Power Supply offers a new level of "ease of use" and programmable functionality in a low cost solution. Direct key in entry makes voltage and current selection fast, accurate and easy. User programmed outputs allow the operator to preset 99 frequently used voltage and current settings into memory for easy recall. Preprogram a 10 step output routine via the keypad or PC interface for automated testing in preproduction, production or R&D environments. In case calibration allows for simple, cost savings, uninterrupted operation.
Nine user programmable preset outputs
Ten step user programmable output routine
In-case calibration
Serial interface cable and software included

1710A 0-30vdc 1a Power Supply <ORDER> $349 [CLICK FOR YOUR PRICE!]

Continuously monitor voltage and current output on two analog meters
Connect two supplies in parallel to double the current output
Connect two supplies in series to double the voltage output
Reliable, Durable
Operate continuously at full load without overheating
Fully overload protected
Coarse and fine voltage controls
Excellent regulation
Very low ripple
Constant voltage or constant current operation

1711A 0-60vdc 2a Power Supply <ORDER> $329 [CLICK FOR YOUR PRICE!]
Continuously monitor voltage and current output on two analog meters
Connect two supplies in parallel to double the current output
Connect two supplies in series to double the voltage output
Reliable, Durable
Operate continuously at full load without overheating
Fully overload protected
Coarse and fine voltage controls
Excellent regulation
Very low ripple
Constant voltage or constant current operation

1715A 0-60vdc 2a Power Supply <ORDER> $409
Continuously monitor voltage and current output on two 4 digit LED displays
Connect two supplies in parallel to double the current output
Connect two supplies in series to double the voltage output
Reliable, Durable
Operate continuously at full load without overheating
Fully overload protected
Coarse and fine voltage controls
Excellent regulation
Very low ripple
Constant voltage or constant current operation

1730A 0-30vdc 3a Power Supply <ORDER> $329 [CLICK FOR YOUR PRICE!]
Continuously monitor voltage and current output on two analog meters
Connect two supplies in parallel to double the current output
Connect two supplies in series to double the voltage output
Reliable, Durable
Operate continuously at full load without overheating
Fully overload protected
Coarse and fine voltage controls
Excellent regulation
Very low ripple
Constant voltage or constant current operation

1735A 0-30vdc 3a Power Supply <ORDER> $409 [CLICK FOR YOUR PRICE!]
Continuously monitor voltage and current output on two 4 digit LED displays
Connect two supplies in parallel to double the current output
Connect two supplies in series to double the voltage output
Reliable, Durable
Operate continuously at full load without overheating
Fully overload protected
Coarse and fine voltage controls
Excellent regulation
Very low ripple
Constant voltage or constant current operation

1740B 0-60vdc 4a Power Supply <ORDER> $539 [CLICK FOR YOUR PRICE!]
•Continuously monitor voltage and current output on two analog meters
•Connect two supplies in parallel to double the current output
•Connect two supplies in series to double the voltage output
•Reliable, Durable
•Operate continuously at full load without overheating
•Fully overload protected
•Coarse and fine voltage controls
•Excellent regulation
•Very low ripple
•Constant voltage or constant current operation

1743B 0-35vdc 6a Power Supply <ORDER> $539 [CLICK FOR YOUR PRICE!]
•Connect two supplies in series to double the voltage output
•Reliable, Durable
•Operate continuously at full load without overheating
•Fully overload protected
•Coarse and fine voltage controls
•Excellent regulation
•Very low ripple
•Constant voltage or constant current operation
•Continuously monitor voltage and current output on two meters

1746B 0-16vdc 10a Power Supply <ORDER> $539 [CLICK FOR YOUR PRICE!]
Continuously monitor voltage and current output on two analog meters
Connect two supplies in parallel to double the current output
Connect two supplies in series to double the voltage output
Reliable, Durable
Operate continuously at full load without overheating
Fully overload protected
Coarse and fine voltage controls
Excellent regulation
Very low ripple
Constant voltage or constant current operation

1501 Dual-Voltage High-Current Battery Eliminator, 1.5V or 3V @3A 105.09 <ORDER>
Dual-Voltage High-Current Battery Eliminator, 1.5V or 3V @3A
Model#1501
Stable voltage and protection of your apparatus and designed into the internal supplies of this battery eliminator. They are separate and isolated from the power line, but share a common ground.

1502 Heavy Duty DC Battery Eliminator, 1.5V,3V,4.5V,6V,12V / 1A 166.26 <ORDER>
Heavy Duty DC Battery Eliminator, 1.5V,3V,4.5V,6V,12V / 1A
Model#1502
Provide DC voltages for low current work while saving bench space.

1503 Analog Display Power Supply 12VAC / 5A, 1-12VDC / 5A 255.09< ORDER>
Analog Display Power Supply 12VAC / 5A, 1-12VDC / 5A
Model#1503
The 1503 is ideal for your low voltage/high current applications. This quality power source features:
Two low voltage/high current outputs
Built in analog voltmeter and ampmeter
Sturdy metal case that can be positioned vertically or horizontally
Adjustable voltage control knob

1504 Compact Power Supply, 0-12VDC / 500mA, 12VAC / 500mA 114.24 < ORDER>
Compact Power Supply, 0-12VDC / 500mA, 12VAC / 500mA
Model#1504 This heavy duty battery eliminator can provide DC voltages up to 12 volts DC. It also has a fixed 12 volt AC output.

1505 Regulated DC Power Supply, 20VDC / 500mA 164.09< ORDER>
Regulated DC Power Supply, 20VDC / 500mA
Model#1505
The 1505 has a output voltage control knob and can provide current up to 500mA.

1506 Regulated DC Power Supply, 40VDC / 1.5A, 20VDC / 3A 184.62 < ORDER>
Regulated DC Power Supply, 40VDC / 1.5A, 20VDC / 3A
Model#1506
Low cost, heavy duty power supply
One year warranty

1510 Discharge Tube Power Supply 595.00 < ORDER>
Discharge Tube Power Supply
Model#1510
Features:
AC and DC high voltage and high current outputs
Built in voltmeter and ampmeter
Voltmeter selectable between the 80V and 500V supplies

1511 Digital Discharge Tube Power Supply 830.00 < ORDER>

Digital Discharge Tube Power Supply
Model#1511
Features:
New digital LED meters, improving the resolution of the readings to 1%
Four separate power supplies, all insulated from each other and grounded: high voltage, bias voltage, filament supply, and Helmholtz coil supply
AC/DC, high voltage, and high current for versatility
Voltmeter selectable between 80V and 500V supplies
Electronic overload protection
Banana jack connectors

1513 Power Supply/Battery Eliminator 3.3/4.5/6/7.5/9/12V, 1A 29.00 < ORDER>
Power Supply/Battery Eliminator 3.3/4.5/6/7.5/9/12V, 1A
Model#1513
This heavy duty battery eliminator can provide DC voltages up to 12 volts with a max output current of 1 amp.

1514 Power Supply/Battery Eliminator 3.3/4.5/6/7.5/9/12V, 3A 42.00 < ORDER>
Power Supply/Battery Eliminator 3.3/4.5/6/7.5/9/12V, 3A
Model#1514
This heavy duty battery eliminator can provide DC voltages up to 12 volts with a max output current of 3 amp.

1520 Universal Power Supply 235.00 < ORDER>
Universal Power Supply
Model#1520
Our multi purpose, space saving power supply is actually several units in one. It has four outputs, three fixed and one variable for versatility. Features include a circuit breaker and chassis ground for extra built in protection. Ideal for Project Physics or PSSC applications.

1605 125W Power Inverter 69.00 < ORDER>
125W Power Inverter
Model#1605
B+K Precisions new model 1605 DC/AC Inverter utilizes a 10 to 15VDC power source such as a standard cigarette lighter to provide an output of 115VAC, 1.2A (125W) at 60Hz. The new 125W Inverter is suitable for a variety of applications such as powering a 115VAC lamp, notebook computer or portable television set from an automobile, camper, boat or other 12VDC battery. Built in over/load protection and low battery warning ensures safe operation.

1620A 0 to 18V, 0 to 5A Analog Display Power Supply 215.00

1621A 0 to 18V, 0 to 5A Digital Display Power Supply 229.00

1623A 0 to 60V, 0 to 1.5A Digital Display Power Supply 229.00

1626A 0 to 30V, 0 to 3A Analog Display Power Supply 229.00

1652 Triple Output Digital Display DC Power Supply 459.00

1672 Triple Output Quad Disp. DC Sply ((2) 0-30V, 0-3A/(1)5V, 3A) 469.00

1689 Regulated Analog 28A DC Power Supply 285.00

1692 3-15VDC, 40A Switching Digital Power Supply 309.00

1744A 0-35 VDC, 0-10A, DC Power Supply 665.00

1745A 0-35V, 0-10A, Digital DC Power Supply 719.00

1761 4 Digit Triple Output Power Sply ((2)0-35V, 0-3A/(1)2-6.5V, 5A 699.00

1788 0-32VDC, 0-6A, Digital Readout DC Power Supply w/RS232 Intfc 509.00

1790 High Current Linear Power Supply, 0-32VDC- 20A, LED 1,395.00

1791 High Current Linear Power Supply, 0-64VDC- 10A, LED 1,395.00

1794 Hi-Current DC Power Supply 0-32V/0-30A 1,695.00

1795 Hi-Current DC Power Supply 0-64V/0-15A 1,695.00 <ORDER>

1796 Hi-Current DC Power Supply 0-16V/0-50A 1,695.00 <ORDER>
Hi-Current DC Power Supply 0-16V/0-50A
Model#1796
The model 1796 is a cost effective, high power, regulated DC power supply with an output rating of (0 to 16V, 0 to 50A). It is a linear high current DC power supply suitable for bench operation or standard 19" rack operation. This linear power supply is a high power workhorse that will easily deliver clean power to your high current circuits. onstant Voltage/Constant Current Operation Remote Programming Facility Facility for Presetting the Output Voltage and Max.
Load Current Limits
Separate DC Output ON/OFF Switch
Remote Sensing Facility
High Stability and Close Regulation ±0.01%
Meet CE Specifications

0-60V, 0-20A High Power Switching DC Power Supply

Model VSP6020

The VSP Power Supply series utilizes modern switch mode technology to produce high-power, low-noise switching supplies that cost around twenty five percent less than linear supplies with the same power. The VSP series offers as much as 1.2 kilowatts in a 19 inch rack mountable chassis that measures just 1U (1.75 inches) in height. The VSP series power supplies can provide precise output voltage control via manual tuning utilizing front panel mounted ten-turn potentiometers or by remote control from an RS 232 interface (provided on standard VSP models) or by GPIB interface (add "GPIB" to the model number for a VSP with GPIB interface instead of RS 232). All models have remote sensing capabilities to automatically maintain desired voltage levels at the load.
Provides 1.2 kilowatts at 20V, 40V, 60V and 120V output voltages (output voltages vary between different models)
Compact 1U (1.75 in by 19 inch rack mountable chassis) is just a home on a bench as it is in a Rack
Up to nine units can be cascaded, producing more than 10 kilowatts of DC power
Front-to-back air flow allows full power operation without space between supplies
Output on/off switch on front of unit
RS 232 interface

0-40V, 0-30A High Power Switching DC Power Supply

Model VSP4030
The VSP Power Supply series utilizes modern switch mode technology to produce high-power, low-noise switching supplies that cost around twenty five percent less than linear supplies with the same power. The VSP series offers as much as 1.2 kilowatts in a 19 inch rack mountable chassis that measures just 1U (1.75 inches) in height. The VSP series power supplies can provide precise output voltage control via manual tuning utilizing front panel mounted ten-turn potentiometers or by remote control from an RS 232 interface (provided on standard VSP models) or by GPIB interface (add "GPIB" to the model number for a VSP with GPIB interface instead of RS 232). All models have remote sensing capabilities to automatically maintain desired voltage levels at the load.
Provides 1.2 kilowatts at 20V, 40V, 60V and 120V output voltages (output voltages vary between different models)
Compact 1U (1.75 in by 19 inch rack mountable chassis) is just a home on a bench as it is in a Rack
Up to nine units can be cascaded, producing more than 10 kilowatts of DC power
Front-to-back air flow allows full power operation without space between supplies
Output on/off switch on front of unit
RS 232 interface

SEARCH Our Website SEARCHING FOR IC's-TRANSISTORS-DIODES TRIACS-BRIDGES-OTHER SEMICONDUCTORS- ETC...? [CLICK HERE] Search for: Match any search words Match all search words SEARCH TIPS EXPAND YOUR SEARCH BY USING "MATCH *ANY* SEARCH WORDS" 123 will show everything with 123 within it. xxx123 xxx123xxx 123xxx ETC. USE "". TO SEARCH FOR (=everything) EVERYTHI* or RYTHING or EVERY* USE "?". TO SEARCH FOR (?=Single Digits) EVERYTHI??? or ????RYTHING or EVERY????? LOOKING FOR 12-1234, ALSO TRY 121234, 12-1234 ETC... Leave off the part number prefix. Instead of XX-12345 search for 12345 or 12345*	Action Electronics 1300 E Edinger Ave-Santa Ana-CA-92705 Tel (800) 563-9405 or (714) 547-5169 FAX: (Scan & Email Us...) Hours: M-F 8am-4pm PST 11am-7pm EST
	Calculator To Refer This Web Page URL to a friend, Enter their email address Here: And Click Send...
Secure Shopping cart	In stock quantity is not [tracked] on the website therefore not reflected at time of order. \| Save Bucks! Be Cool! Join Our Email List! \|