Join Us!! |
Action-Electronics.com Since 1972 - Santa Ana CA. | Tel 800-563-9405 or (714) 547-5169 |
||
|
NO Minimum Orders |
Payment, Shipping & Order Options - General Help - FAQ - RETURNS |
SURPLUS
-
International |
||
|
|
 
 |
|||
|
|
| Some alignment tools are non-inductive, non-magnetic, thermally and electrically insulated, and anti-static. |
Anti-Static Alignment Tool KitKit contains all nine anti-static alignment tools. The wide range of tip styles and sizes assures that the user will have a tool for adjusting or aligning any conventional component. Supplied with pocket storage case. Kit contains 1 each: AS-5004 Adjustment Screwdriver AS-8275 Combination Aligner AS-8276 Steel Tip Duplex Aligner AS-8605 Small Hex & Screwdriver AS-8606 Hex & Tip Tool AS-8608 Mini Potentiometer & Trimmer Tool AS-9300 Double Ended Hex Tool AS-9302 3-in-1 Hex Core Tool AS-9440 Square & Hex Tool Cat. No. AS-5007 |
 2 In 1 Ceramic Adjuster Includes 1.8 mm Flat blade and 3.0 mm Phillips. Non-slip handle securely holds ceramic adjusting tip. Removable protective cap fits directly on tip, or can be used with handle, as an extension. Completely insulated, nonmagnetic and anti-static. Resists heat up to 1000°C. Resists acids (except Hydrofluoric) and solder. |
 Screwdriver with Plastic Handle Material: Fiberglass Shaft: 1/8" (3.2 mm) dia., 7" (17.7 cm) long Ends: 1/32" thick screwdriver tip; 2-3/8" (6 cm) long screwdriver handle Total Length: 9-3/8" (23.8 cm) N.S.N. 5120-00-134-4958 N.S.N. 5120-00-542-2936 |
 Hex & Special Tip Tool Material: Conductive Nylon, Hex 0.100" Ends: Flat screwdriver tip (0.027" thick—0.095" wide), followed by 0.100" hex; 0.100" hex, 7/32" long, undercut shaft to reach bottom slugs in coils Total Length: 5-3/32" (12.9 cm) |
 Miniature Potentiometer—Trimmer Adjustment Tool Material: Conductive NylonShaft: 1/4" (6.3 mm) dia. 4-15/16" (12.5 cm) long Ends: .085" (2.2 mm) wide steel tip; .085" (2.2 mm) wide steel tip, recessed .040" Total Length: 4-15/16" (12.5 cm) |
|
Miniature Potentiometer-Trimmer Adjustment Tool Material: Nylon Shaft: 1/4" (6.3 mm) dia. 4-15/16" (12.5 cm) long Ends: .085" (2.2 mm) wide steel tip; .085" (2.2 mm) wide steel tip, recessed .040" Total Length: 4-15/16" (12.5 cm) |
|
|
|
|
  Double Sided Hex End Tool Material: Delrin, Hex 5/64" (0.078") Ends: 1/4" long hex, 0.096" dia. shaft; 3/8" long hex, undercut (0.068" dia.) shaft to reach bottom slugs in coils Total Length: 5" (12.7 cm) |
 3-in-1 Hex Core Tool Material: Delrin, Hex 5/64" (0.078") Ends: Small (0.078") hex followed by 0.100" hex; 0.100" hex (3/8" long), undercut shaft to reach bottom slugs in coils Total Length: 5-3/8" (13.7 cm) |
Square & Hex End ToolMaterial: Delrin, Hex 0.100" Ends: 0.100" (2.5 mm) hex, 3/8" (9.5 mm) long; 1/16" (0.062"-1.6 mm) square, 1/32" (0.1 cm) long Total Length: 5-1/16" (12.8 cm) |
 Contact
Burnishing Tools & KitsGC burnishing tools—consist of stainless steel strips, micro-scored to an ultra-fine file surface. They remove oxide and corrosion on relay and switch contact points made of platinum, paladium, molydenum, gold tungsten and silver. The standard tool is used on medium and large contact points whereas the fineline tool is recommended for use on small and miniature components. 0.120" wide Fineline tool. |
|
EXPAND YOUR SEARCH BY USING "MATCH ANY SEARCH WORDS" *123* will show everything with 123 within it. xxx123 xxx123xxx 123xxx ETC. USE "*". TO SEARCH FOR (*=everything) EVERYTHI* or *RYTHING or *EVERY* USE "?". TO SEARCH FOR (?=Single Digits) EVERYTHI??? or ????RYTHING or EVERY????? LOOKING FOR 12-1234, ALSO TRY *121234*, *12-1234* ETC... Leave off the part number prefix. Instead of XX-12345 search for *12345 or *12345* |
|
|
|
|
|
|
In
stock quantity is not [tracked]
on the website therefore not reflected at time of order. |
